AGFA d-lab.3 Digital Compact Lab

Printer
Repair
− Define the pixel shift or delay and enter the new
values.
Script Files\scripts_dlab\
scripts_printer\data_la\
pixelshift_and_pixeldelay.txt
Example: Blue must move 3/8 pixels to the left
Delay Red 0, Green 2, Blue 0
Shift Red 10000111
Green 11100001
Blue 11100001
− Print the test print TESTPRINT01.ARP Script
Files\scipts_dlab\setup_dat\
testprint.txt
For identification, the corresponding correction
should be entered as back print.
− The adjustment is repeated until all 3 colours are
centred on each other:
− Then enter the values found:
Script Files\scipts_dlab\setup_dat\
setup_init_pr_00XXX.txt
− Run the Script.
A confirmation is requested for every modified
Setup value.
− Close Service
− Close the d-lab.3 program:
Press the Windows key or +
Double-click on Watchdog
Close the Watchdog by clicking on X
− Start the d-lab.3 program again:
Click on the d-lab.3 icon on the Desktop.
Only then will the modified Setup values become
effective.
− Check the modified values for pixel delay and
pixel shift with TESTPRINT01.ARP
■
6.3.66 2001-01-02 /PN 9009 AGFA d-lab.3