AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Quick Version to define the Pixel Delay and the Pixel Shift
No backup function
The above setting is an iterative process. To prevent
the repeated starting and closing of the d-lab.3
program, a temporary Script can be used for the
adjustment. Afterwards the new values have to be
entered in the file setup_init_pr_00XXX.txt.
− Set PBL in tolerance
− Start Service
− Check the current Setup values:
Script Files\scripts_dlab\setup_dat\
pr_vers_setup.txt
− Note down Delay and Shift
The shift value that is output is the result of the
added 3-Bit combination of Red, Green, Blue.
This result must be calculated back to the 3 single
colours by subtraction (see Pixel shift).
Example:
Shift 32204557
− Script Files\scripts_dlab\
scripts_printer\data_la\
pixelshift_and_pixeldelay.txt
Run the Script and enter Delay and Shift in the
interrogation windows.
Example:
Delay Red 0, Green 2, Blue 0
Shift Red 10000111
Green 11100001
Blue 00001111
− Script Files\scripts_dlab\setup_dat\
testprint.txt
Print the test print TESTPRINT01.ARP
− Assess the print, check pixel coverage faults
AGFA d-lab.3 2001-01-02 /PN 9009 6.3.65