AGFA d-lab.3 Digital Compact Lab

Printer
Repair
− Enter new values directly into the Script at
position X after ....
Admissible setting range:
Delay 0 ... 15
Shift 0 ... 7
########## Beginning of the Editing range #############
:
:
# Pixeldelay RT (0 ...15)
calc $ has_b_02 = X
# Pixeldelay GN (0 ...15)
calc $ has_b_02 = X
# Pixeldelay BL (0 ...15)
calc $ has_b_02 = X
# Pixelshift 1 (0...7)
calc $ has_b_05 = X
# Pixelshift 2 (0...7)
calc $ has_b_05 = X
:
:
# Pixelshift 8 (0...7)
calc $ has_b_05 = X
− Run the Script
A confirmation is requested for every modified
Setup value.
Caution!
Stop the procedure if modified values (old => new)
are displayed that should not be modified.
Check the output of the values of file
pr_vers_setup.txt and enter them in
setup_init_pr_00XXX.txt.
− Close Service
− Close the d-lab.3 program:
Press the Windows key or +
Double-click on Watchdog
Close the Watchdog by clicking on X
− Start the d-lab.3 program again:
Click on the d-lab.3 icon on the Desktop.
Only then will the modified Setup values become
effective.
− Check the modified values for pixel delay and
pixel shift with TESTPRINT01.ARP
6.3.64 2001-01-02 /PN 9009 AGFA d-lab.3