AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Example:
Red
1 / 8 pixel to the left
Green
3 / 8 pixels to the left
Blue remains unchanged
Test of the correctness of this example:
For Red 4 connected ones (and zeros), for Green 4
connected zeros, for Blue 4 connected ones. All
colours are described by 4 ones and 4 zeros.
Incomplete quick test:
The total of all digit numbers to be entered is 28.
R: 1 0 0 0 0 1 1 1 (2 0 )
G: 1 1 1 0 0 0 0 1 (2 1 )
B: 0 0 0 0 1 1 1 1 (2 2 )
Entry: 3 2 2 0 4 5 5 7
Saving the new Values
The Setup values for the pixel shift and the pixel
delay are saved on the Mainboard PR_GS01.
Checking the current Setup values
− Call up in the Service Script:
Script Files\scripts_dlab\setup_dat\
pr_vers_setup.txt
− Run the Script
The Info window shows the current values (of the
example) after Setup – values HAS (Byte):
:
PIXEL-Delay : 00 (RT), 00 (GN), 00(BL)
PIXEL-Shift (hex) : 03, 02, 02, 00, 04, 05, 05, 07
:
:
Editing the Setup values
− Call up in the Service Script:
Script Files\scripts_dlab\setup_dat\
setup_init_pr_00117.txt
This Init file exists in 2 versions
− Default
setup_init_pr_00000.txt
− Printer-specific with SN
setup_init_pr_00XXX.txt
This version must contain the same Setup
values that were found with the sample script;
if not, the sampled values must be entered
here.
AGFA d-lab.3 2001-01-02 /PN 9009 6.3.63