AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Sheet Transfer ST
The sheet transfer ST takes the sheet from the lane
distributor and transports it into the DEV tank of the
Paper Processor.
The transfer of the exposed prints from the lane
distributor to the Paper Processor is performed as a
function of the paper width and length:
dlabr062
2 lanes 1 lane
Prints aligned on front Prints offset
edge
Paper width max. 102 mm max. 102 mm > 102 mm
Paper length max. 178 mm > 178 mm max. 256 mm
See also Flowcharts Lane distributor in this
Register
LD Parameters: Paper Widths / Distribution
The middle of the lane distributor is 40 mm closer to
the Printer front edge than the middle of the Paper
Processor.
Paper widths in Inch 2 lanes +Y (to the back) -Y (to the front)
3,25 X 120 0
3,5 X 120 0
3,75 X 120 0
4 X 120 0
4,75 40 -
5 40 -
6 40 -
6,5 40 -
7 40 -
8 40 -
8,25 40 -
3,5 control strip - 95
AGFA d-lab.3 2001-01-02 /PN 9009 6.3.53