AGFA d-lab.3 Digital Compact Lab

More documents

Recommendations

Info

Repair Printer Operating Voltage Supply The printed circuit E_GS01 gets its supply voltage through the SPI interface ST1 as source voltage of +6,5V. This voltage is stabilised to +5V by a linear regulator and supplies the Controller and the light sensors. The power voltages +24V and +36V are supplied through ST24. These voltages are led to circuit that serves as current limitation when the module is plugged under power. − The +24V are used to energise the feed and exit roller drive (DC motor) and the polygon drive. − The 36V supplies all stepper motor drives. This voltage is also used to derive via a switching regulator an additional +5V for the output stage supply, the supply of the sub- controller and the shift register. This way, the power unit is electrically separated by the logic part of the Controller and by this of the whore Printer. The signal transmission is ensured by corresponding optocouplers. A comparator circuit provides for a status signal of the three supply voltages. Controller Firmware Update In addition to the provided Update option via the SPI interface, the Controller can be programmed separately via ST2. The sub-controller can only be programmed on-board by means of a suitable PIN- Adapter. Debug Connection A non real time-capable RS232 monitor output is available on ST3 for Debut purposes. AGFA d-lab.3 2001-01-02 /PN 9009 6.3.41
Printer Repair PE_GS01, Layout dlabr201 Voltages + 5V Logic supply + 6,5V Logic source voltage + 9V Supply voltage – 9V Supply voltage + 24V Supply voltage + 36V Power voltage supply Jumpers ST25 not plugged in Only for service: Activation of the display LEDs, operating conditions can be checked plugged in ST3 RS232 monitor for Debug purposes (19200,N,1) ST29 Pin connector as test pins for sensor signals 11 +5V 12 GND 13 PE_LS2 14 LASD_OK 15 PE_LS4 16 PE_LS3 17 PE_LS1 18 PE_LS8 19 PE_LS7 20 f_BOP Output frequency of the BOP sensor approx. 100 Hz without paper, 1 KHz with paper; a significant difference is important because the thresholds change dynamically 6.3.42 2001-01-02 /PN 9009 AGFA d-lab.3
Page 1 and 2:
TECHNICAL DOCUMENTATION DD+18060022
Page 3 and 4:
List of Registers Edition Register
Page 5 and 6:
Repair Introduction Contents Use of
Page 9 and 10:
Repair Introduction Use of the Tech
Page 11 and 12:
Repair Introduction Legal Situation
Page 13 and 14:
Repair Introduction Handling Photoc
Page 15 and 16:
Repair Introduction All photographi
Page 17 and 18:
Repair Introduction Storage Chemica
Page 19 and 20:
Repair Basic Machine Contents Major
Page 23 and 24:
Repair Basic Machine Major Assembly
Page 25 and 26:
Repair Basic Machine Electrical Str
Page 27 and 28:
Repair Basic Machine Description Al
Page 29 and 30:
Repair Basic Machine Names of Assem
Page 31 and 32:
Repair Basic Machine Assembly group
Page 33 and 34:
Basic Machine Repair Signals dlab13
Page 35 and 36:
Repair Basic Machine Connection Pri
Page 37 and 38:
Repair Basic Machine Connections Fi
Page 39 and 40:
Repair Basic Machine RH Magazine Dr
Page 41 and 42:
Repair Basic Machine Sheet Gear SG
Page 43 and 44:
Repair Basic Machine Lane Distribut
Page 45 and 46:
Repair Basic Machine Mains Connecti
Page 47 and 48:
Repair Basic Machine Connections AG
Page 49 and 50:
Repair Basic Machine Power Supply (
Page 51 and 52:
Basic Machine Repair 55A-PWD (2/5)
Page 53 and 54:
Basic Machine Repair 55A-PWD (4/5)
Page 55 and 56:
Basic Machine Repair 55P-CNR 2.34 2
Page 57 and 58:
Basic Machine Repair 55P-IRC (1/2)
Page 59 and 60:
Basic Machine Repair 55P-MDV (1/4)
Page 61 and 62:
Basic Machine Repair 55P-MDV (3/4)
Page 63 and 64:
Basic Machine Repair 55P-SSR • 2.
Page 65:
Diagnosis / Troubleshooting Repair
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Scanner Repair Functional Descripti
Page 87:
Scanner Repair ■ 4.iv 2001-01-02
Page 91 and 92:
Repair Scanner Block Circuit Diagra
Page 93 and 94:
Repair Scanner Image Recording dlab
Page 95 and 96:
Repair Scanner Scanner Motherboard:
Page 97 and 98:
Repair Scanner Driver Sensor Board
Page 99 and 100:
Repair Scanner Driver Sensor Board:
Page 101 and 102:
Repair Scanner FD/SD Output Stage d
Page 103 and 104:
Repair Scanner FL Controller: LEDs
Page 105 and 106:
Repair Scanner Algorithm/Interface
Page 107 and 108:
Repair Scanner CG Controller dlab08
Page 109 and 110:
Repair Scanner CCD Board dlabr084e
Page 111 and 112:
Repair Scanner Prescanner dlab091e
Page 115 and 116:
Repair Scanner Signal Lists Descrip
Page 117 and 118:
Repair Scanner Mirror Box MB No. De
Page 119 and 120:
Repair Scanner Activation of Motors
Page 123 and 124:
Repair Scanner Functional Descripti
Page 125 and 126:
Repair Scanner Scanner Optic dlab14
Page 127 and 128:
Repair Scanner Main Scan Cycle Filt
Page 129 and 130:
Repair Scanner Filter Wheel LH_MO01
Page 131 and 132:
Repair Scanner The motor is energis
Page 133 and 134:
Repair Scanner Auxiliary Shutter (D
Page 135 and 136:
Repair Scanner Position Auxiliary D
Page 137 and 138:
Repair Scanner Amplifiers, function
Page 139 and 140:
Repair Scanner Lenses − Fixed foc
Page 141 and 142:
Repair Scanner Functions and Proper
Page 143 and 144:
Repair Scanner Film Drive NC_MO01 T
Page 145 and 146:
Repair Scanner Control The Motherbo
Page 147 and 148:
Repair Scanner FD/SD Output Stage (
Page 149 and 150:
Repair Scanner Functions: − Contr
Page 151 and 152:
Repair Scanner The TFS is not perfo
Page 153 and 154:
Repair Scanner CG Controller (CCD G
Page 155 and 156:
Repair Scanner Driver Sensor Board
Page 157 and 158:
Repair Scanner I 2 C Bus The 2-Bit
Page 161 and 162:
Repair Scanner Repair / Adjustments
Page 163 and 164:
Repair Scanner Shutter Toothed belt
Page 165 and 166:
Repair Scanner − Check the belt d
Page 167 and 168:
Repair Scanner 2-Film Feeder Dismou
Page 169 and 170:
Repair Scanner Installing the Feede
Page 171 and 172:
Repair Scanner Feeder rocker Feeler
Page 173 and 174:
Repair Scanner − Light sensor act
Page 175 and 176:
Repair Scanner Changing the Lifting
Page 177 and 178:
Repair Scanner 1a Cover plate A 1b
Page 179 and 180:
Repair Scanner Changing the Light S
Page 181 and 182:
Repair Scanner Replacing the Zoom /
Page 183 and 184:
Repair Scanner Precanner Adjustment
Page 185 and 186:
Repair Scanner Remove the following
Page 187 and 188:
Repair Scanner Scanner Calibration
Page 189 and 190:
Repair Scanner White Balance A whit
Page 191 and 192:
Repair Scanner Moment of Execution
Page 193 and 194:
Repair Main-PC Contents Overview ..
Page 197 and 198:
Repair Main-PC Overview Main-PC dla
Page 199 and 200:
Repair Main-PC Drives Drives (drive
Page 201 and 202:
Repair Main-PC PC Mainboard Connect
Page 203 and 204:
Repair Main-PC BIOS Settings AWARD
Page 205 and 206:
Repair Main-PC Operating System Win
Page 207 and 208:
Repair Main-PC Repair Removal of th
Page 209 and 210:
Repair Printer Contents General Ove
Page 211 and 212:
Repair Printer Removal, Installatio
Page 215 and 216:
Repair General Overview Sensors and
Page 217 and 218:
Printer Repair Electrical Structure
Page 219 and 220:
Printer Repair Voltages on the d-la
Page 221:
Printer Repair ■ 6.1.8 2001-01-02
Page 225 and 226:
Printer Repair Printer Mainboard PF
Page 227 and 228:
Printer Repair Paper Magazine RH MR
Page 229 and 230:
Printer Repair Transport Unit TU /
Page 231 and 232:
Printer Repair Laser Module LA Some
Page 233 and 234:
Printer Repair Sheet Transfer ST Pr
Page 235 and 236:
Printer Repair ST 3: SPI - Interfac
Page 237 and 238:
Printer Repair ST 7: SPI - Interfac
Page 239 and 240:
Printer Repair ST 26: CAN - Interfa
Page 241 and 242: Printer Repair Printer Mainboard, C
Page 243 and 244: Printer Repair ST17 Trailing cable
Page 245 and 246: Printer Repair PE_GS01, Connector A
Page 247 and 248: Printer Repair ST11 DC motor supply
Page 249: Printer Repair ST29 Pin connector s
Page 253 and 254: Printer Repair Paper Transport and
Page 255 and 256: Printer Repair Behaviour upon Print
Page 257 and 258: Printer Repair Sheet Rotation / She
Page 259 and 260: Printer Repair Roller Exit, Part 1
Page 261 and 262: Printer Repair Flowcharts, Lane Dis
Page 263 and 264: Printer Repair Sheet Distribution -
Page 265 and 266: Printer Repair Sheet Transfer to Pa
Page 267 and 268: Printer Repair Functional Descripti
Page 269 and 270: Printer Repair 4. Begin Off Line (B
Page 271 and 272: Printer Repair The following modes
Page 273 and 274: Printer Repair 17. Calculation The
Page 275 and 276: Printer Repair PF_GS01 - Technical
Page 277 and 278: Printer Repair Magazine Drive MD ML
Page 279 and 280: Printer Repair − The paper transp
Page 281 and 282: Printer Repair ML_GS02 / MR_GS02 an
Page 283 and 284: Printer Repair Layout dlabr205 Volt
Page 285 and 286: Printer Repair Transport Unit TU Fu
Page 287 and 288: Printer Repair Voltages + 5V Logic
Page 289 and 290: Printer Repair Laser Module Warning
Page 291: Printer Repair Connection of the po
Page 295 and 296: Printer Repair Circuit Diagram dlab
Page 297 and 298: Printer Repair Laser Remote After t
Page 299 and 300: Printer Repair Test Points MP1 +5 +
Page 301 and 302: Printer Repair LA_GS05 - Red Laser
Page 303 and 304: Printer Repair Lane Distributor LD
Page 305 and 306: Printer Repair LD_GS01 - Lane Distr
Page 307 and 308: Printer Repair RD_GS01 - Back Print
Page 309 and 310: Printer Repair Laser Module (LA) Th
Page 311 and 312: Printer Repair Laser Sources Laser
Page 313 and 314: Printer Repair There are 2 methods
Page 315 and 316: Printer Repair − Enter new values
Page 317: Printer Repair − Define the pixel
Page 321 and 322: Printer Repair Mainboard Replacemen
Page 323 and 324: Printer Repair − Determine the op
Page 325 and 326: Printer Repair Download XILINKS (pr
Page 327 and 328: Printer Repair Loading setup values
Page 329 and 330: Printer Repair − Print a test pri
Page 331 and 332: Printer Repair Hexagon socket screw
Page 333 and 334: Printer Repair Replacing the Magazi
Page 335 and 336: Printer Repair Replacing the Cutter
Page 337 and 338: Printer Repair Replacing the Switch
Page 339 and 340: Printer Repair Replacing the Motor
Page 341 and 342: Printer Repair Replacing the Pressu
Page 343 and 344:
Printer Repair Sheet Bridge SB, rep
Page 345 and 346:
Printer Repair Replacing the Sync D
Page 347 and 348:
Printer Repair Transport Unit TU, r
Page 349 and 350:
Printer Repair Toothed Belt Adjust
Page 351 and 352:
Printer Repair Replacing the Turnta
Page 353 and 354:
Printer Repair Replacing the Motor
Page 355 and 356:
Printer Repair − Fastening of the
Page 357 and 358:
Printer Repair Replacing the Light
Page 359 and 360:
Printer Repair Replacing the Set of
Page 361 and 362:
Printer Repair Replacing the Set of
Page 363 and 364:
Printer Repair Replacing the comple
Page 365 and 366:
Printer Repair Replacing the Laser
Page 367 and 368:
Printer Repair Caution! Use only th
Page 369 and 370:
Printer Repair − The tip of the p
Page 371 and 372:
Printer Repair Replacing the AOM Am
Page 373 and 374:
Printer Repair Lane Distributor LD,
Page 375 and 376:
Printer Repair Replacing the LD_GS0
Page 377 and 378:
Printer Repair Replacing toothed Be
Page 379 and 380:
Printer Repair Readjust the print h
Page 381 and 382:
Printer Repair Sheet Transfer ST, r
Page 383 and 384:
Printer Repair ■ 6.4.64 2001-01-0
Page 385:
Paper Processor Repair ■ 7.ii 200
Page 389 and 390:
Repair Paper Processor Block Circui
Page 393 and 394:
Repair Paper Processor Signal Lists
Page 395 and 396:
Repair Paper Processor Paper Exit P
Page 397 and 398:
Repair Paper Processor Connections
Page 401 and 402:
Repair Paper Processor Functional D
Page 403 and 404:
Repair Paper Processor Electrical S
Page 405 and 406:
Repair Paper Processor Paper Proces
Page 407 and 408:
Repair Paper Processor AC/DC Power
Page 409 and 410:
Repair Paper Processor AC Power Sup
Page 411 and 412:
Repair Paper Processor Densitometer
Page 415 and 416:
Repair Paper Processor Repair Repla
Page 417 and 418:
Repair Paper Processor Replacing Pr
Page 419 and 420:
Repair Paper Processor Temperature
Page 421 and 422:
Repair Software Contents Software S
Page 425 and 426:
Repair Software Software Structure
Page 427 and 428:
Repair Software Software Structure
Page 429 and 430:
Repair Maintenance Contents Mainten
Page 433 and 434:
Repair Maintenance Maintenance Sche
Page 435 and 436:
Repair Maintenance Maintenance Jobs
Page 437 and 438:
Repair Maintenance Negative Mask: L
Page 439 and 440:
Repair Maintenance Paper Processor
Page 441 and 442:
Repair Maintenance Cleaning the Eva
Page 443 and 444:
Repair Maintenance Paper Magazine A
Page 445 and 446:
Repair Maintenance Consumables / Cl
Page 447 and 448:
Repair General Data and Information
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Repair Index Index A Additional Air
Page 465 and 466:
Repair Index S (cont.) Service Func
show all

AGFA d-lab.3 Digital Compact Lab

Create successful ePaper yourself

Delete template?

Save as template?