AGFA d-lab.3 Digital Compact Lab

Repair
Printer
Voltages
+ 5V Logic supply
+ 6,5V Logic source voltage
+ 24V Supply voltage
+ 36V Power voltage supply
Jumper
J1
not plugged in
Only for the service:
plugged in
Activation of the display LEDs, operating conditions can be checked
LED Display
D12 LED green Lights when logic voltage +5V is present
D22 LED red Lights when Reset of the GS is active;
Reset can be triggered manually with S2
D13 LED yellow Only for development work; is active when the AVR Controller is
triggered via an external programming unit
Test Points
MP1 + 5V
MP2 GND GND against +5V
MP3 not used
MP4 not used
MP5 not used
AGFA d-lab.3 2001-01-02 /PN 9009 6.3.29