AGFA d-lab.3 Digital Compact Lab

Printer
Repair
ST11 DC motor supply and exit roller drive
1 V+
2 V-
ST12 PE-LS7 Reflected light sensor print roller rotation control
1 +5V
2 Signal input
3 GND
4 GND
ST13 PE-LS4 Fork light sensor Speed – Sensor supply and exit roller
1 +5V
2 GND
3 Signal input
ST14 PE_LS2 Fork light sensor flap (not used)
1 +5V
2 GND
3 Signal input
ST15 PE_LS5 BOP sensor
1 +5V
2 Signal input (Frequency)
3 GND
4 nc
ST17 PE_LS1 LS in front of print roller
1 +5V
2 Signal input
3 GND
4 GND switched to LED switch-off
ST18 PE_LS3 LS behind print roller
1 +5V
2 Signal input
3 GND
4 GND
ST19 Connection for polygonal drive
1 +24V supply voltage
2 PGND
3 LOCKED Feedback „f_END reached“
4 START/STOP ON/OFF of the polygonal drive
5 PGND
6 /INDEX Index pulse from the polygonal drive at every rotation
7 nc
8 F_POLY Generator frequency for polygonal drive
6.2.24 2001-01-02 /PN 9009 AGFA d-lab.3