AGFA d-lab.3 Digital Compact Lab

Main-PC
Repair
Timer Board
PCI-Slot #3
The Timer board is connected to the Mainboard by
2 cables:
− Cable 1 (A) supplies the Timer board with the
Standby voltage of +5 V
− Cable 2 (B) switches on the PC
The operating voltage of +5 V is sent to the Timer
board via the ISA or PCI rack, or else via ST08
(Pin 3 +5 Volt, Pin 4 GND).
The d-lab.3 is switched on step by step via
ST01 - ST06.
dlab285
Image Processing Board (VIPS)
− 200 MHz
− 2 Texas Instruments DSP Processors
− 512 MByte
The image processing board is supplied by +5 V via
a Y cable.
dlabr286
1 Printer
2 Scanner
5.6 2001-01-02 /PN 9009 AGFA d-lab.3