AGFA d-lab.3 Digital Compact Lab

Repair
Scanner
− Light sensor actuator:
15 ± 0,1 mm after the adjustment with the
metal gauge (15 mm wide)
Adjust the Feeder and move it into zero position
(distance 15 mm, move the driver in closed direction
of the skids)
− Detach the light sensor actuator and move it
into the light sensor from the outside until
the latter responds
− Fasten the light sensor actuator
− After opening the skids to size 120 and
closing them again to zero position, the dimension
between the skids must be again
15 ± 0,1 mm.
− If necessary, correct the light sensor actuator
1 Light sensor actuator
2 Gauge
dlabr234
AGFA d-lab.3 2001-01-02 /PN 9009 4.4.13