AGFA d-lab.3 Digital Compact Lab

Scanner
Repair
Additional drive:
− Pressure force of the counter roller in closed
condition, measured under spring load when
the air gap between the rollers disappears
(before the rollers are lifted)
7 - 9 N (meter)
− Film tractive force; drive active, force to stop
the film while the drive is running
F ≥ 2,0 N (test leader, spring balance)
Light sensors FF_LS02 and FF_ LS04:
− Height of the light sensors
Distance between varnished surface on
Feeder cast part and front surface of reflected
light sensor
FF_LS02 and FF_LS04
x = 8,5 ± 0,5 mm (calliper gauge)
dlabr231
Adjustment of the Feeder:
− x direction:
Distance between the upper FF rocker and the
negative carrier 135FF
∆x = 0,5 ± 0,1 mm (feeler gauge)
− Operate the rocker manually:
Dimension at the narrowest point ∆x
dlabr232
1 Negative mask
2 Feeder rocker
4.4.12 2001-01-02 /PN 9009 AGFA d-lab.3