AGFA d-lab.3 Digital Compact Lab

Repair
Scanner
Shutter
Toothed belt:
Visual check: Must not brush
Toothed belt pulley on the motor:
Starting torque of the clamp
1,8 Nm ± 0,1 Nm
Toothed belt pulleys (visual check)
In alignment
Height mismatch ≤ 1 mm
Toothed belt:
Belt tension 191 Hz ± 10%
Alternative F = 1,1 ± 0,1 N
with 2 mm deflection
Belt tension meter or meter
Calliper gauge
− Check the belt tension with a belt tension meter
− Check the belt deflection
dlabr222
1 Toothed belt
2 Steel core cut
3 Markings (must point towards each other)
4 Measuring head
dlabr223
1 Toothed belt
2 Steel core cut
3 Markings (must point towards each other)
AGFA d-lab.3 2001-01-02 /PN 9009 4.4.3