AGFA d-lab.3 Digital Compact Lab
AGFA d-lab.3 Digital Compact Lab AGFA d-lab.3 Digital Compact Lab
Scanner Repair − Check the belt deflection dlabr221 1 Toothed belt 2 Steel core cut 4.4.2 2001-01-02 /PN 9009 AGFA d-lab.3
Repair Scanner Shutter Toothed belt: Visual check: Must not brush Toothed belt pulley on the motor: Starting torque of the clamp 1,8 Nm ± 0,1 Nm Toothed belt pulleys (visual check) In alignment Height mismatch ≤ 1 mm Toothed belt: Belt tension 191 Hz ± 10% Alternative F = 1,1 ± 0,1 N with 2 mm deflection Belt tension meter or meter Calliper gauge − Check the belt tension with a belt tension meter − Check the belt deflection dlabr222 1 Toothed belt 2 Steel core cut 3 Markings (must point towards each other) 4 Measuring head dlabr223 1 Toothed belt 2 Steel core cut 3 Markings (must point towards each other) AGFA d-lab.3 2001-01-02 /PN 9009 4.4.3
- Page 111 and 112: Repair Scanner Prescanner dlab091e
- Page 115 and 116: Repair Scanner Signal Lists Descrip
- Page 117 and 118: Repair Scanner Mirror Box MB No. De
- Page 119 and 120: Repair Scanner Activation of Motors
- Page 123 and 124: Repair Scanner Functional Descripti
- Page 125 and 126: Repair Scanner Scanner Optic dlab14
- Page 127 and 128: Repair Scanner Main Scan Cycle Filt
- Page 129 and 130: Repair Scanner Filter Wheel LH_MO01
- Page 131 and 132: Repair Scanner The motor is energis
- Page 133 and 134: Repair Scanner Auxiliary Shutter (D
- Page 135 and 136: Repair Scanner Position Auxiliary D
- Page 137 and 138: Repair Scanner Amplifiers, function
- Page 139 and 140: Repair Scanner Lenses − Fixed foc
- Page 141 and 142: Repair Scanner Functions and Proper
- Page 143 and 144: Repair Scanner Film Drive NC_MO01 T
- Page 145 and 146: Repair Scanner Control The Motherbo
- Page 147 and 148: Repair Scanner FD/SD Output Stage (
- Page 149 and 150: Repair Scanner Functions: − Contr
- Page 151 and 152: Repair Scanner The TFS is not perfo
- Page 153 and 154: Repair Scanner CG Controller (CCD G
- Page 155 and 156: Repair Scanner Driver Sensor Board
- Page 157 and 158: Repair Scanner I 2 C Bus The 2-Bit
- Page 161: Repair Scanner Repair / Adjustments
- Page 165 and 166: Repair Scanner − Check the belt d
- Page 167 and 168: Repair Scanner 2-Film Feeder Dismou
- Page 169 and 170: Repair Scanner Installing the Feede
- Page 171 and 172: Repair Scanner Feeder rocker Feeler
- Page 173 and 174: Repair Scanner − Light sensor act
- Page 175 and 176: Repair Scanner Changing the Lifting
- Page 177 and 178: Repair Scanner 1a Cover plate A 1b
- Page 179 and 180: Repair Scanner Changing the Light S
- Page 181 and 182: Repair Scanner Replacing the Zoom /
- Page 183 and 184: Repair Scanner Precanner Adjustment
- Page 185 and 186: Repair Scanner Remove the following
- Page 187 and 188: Repair Scanner Scanner Calibration
- Page 189 and 190: Repair Scanner White Balance A whit
- Page 191 and 192: Repair Scanner Moment of Execution
- Page 193 and 194: Repair Main-PC Contents Overview ..
- Page 197 and 198: Repair Main-PC Overview Main-PC dla
- Page 199 and 200: Repair Main-PC Drives Drives (drive
- Page 201 and 202: Repair Main-PC PC Mainboard Connect
- Page 203 and 204: Repair Main-PC BIOS Settings AWARD
- Page 205 and 206: Repair Main-PC Operating System Win
- Page 207 and 208: Repair Main-PC Repair Removal of th
- Page 209 and 210: Repair Printer Contents General Ove
- Page 211 and 212: Repair Printer Removal, Installatio
Scanner<br />
Repair<br />
− Check the belt deflection<br />
dlabr221<br />
1 Toothed belt<br />
2 Steel core cut<br />
4.4.2 2001-01-02 /PN 9009 <strong>AGFA</strong> d-<strong>lab.3</strong>