AGFA d-lab.3 Digital Compact Lab

Scanner
Repair
Film Transport in the Feeder FF_MO02
The motor FF_MO02 draws the film into the Feeder
and transports it to the gear.
The motor has a step angle of 1,8°. The
transmission to the drive is 1:1.
When the motor is turning cw, the film is exited from
the Feeder.
− Light sensor FF_LS02 recognises whether a film
has been inserted in the Feeder
− Light sensor FF_LS04 recognises whether the
film is in front of the gear
− FF_MO02_ENA energises the motor
− FF_MO02_DIR indicates the direction
− FF_MO02_CLK clocks the motor
Position of the Film Drive Roller FF_MO04
This DC motor positions the film drive roller in the
Feeder.
The light sensors FF_LS07 and FF_LS08 indicate
the top and bottom position of the gear.
The motor remains switched on until the film drive
roller has reached its end position.
Position of the Gear FF_MO03
This DC motor positions the gear.
The light sensors FF_LS05 and FF_LS06 indicate
the top and bottom position of the gear.
The motor remains switched on until the gear has
reached its end position.
4.3.20 2001-01-02 /PN 9009 AGFA d-lab.3