AGFA d-lab.3 Digital Compact Lab

Scanner
Repair
Mirror Box
The mirror box influences the overall brightness
and the illumination.
The two mirror boxes can be changed any
number of times. When a mirror box is changed, a
complete initialisation including a calibration is
performed.
Mirror Box Versions
− Fast for size 135 and smaller
(small light transmission, hence faster)
− Slow for sizes as of 4.5x6
(large light transmission, hence slower)
Mirror Box Motor MB_MO01
Motor MB_MO01 can be used to fold an additional
frosted glass in the light path. A control disk is
fastened to the motor that covers the light sensor
with varying segments.
The motor position is defined by the light sensor
MB_LS01. On the basis of the run times, the
Software determines in which position the motor
is.
The motor stops automatically at a dark-light
transition of the light sensor (signal MB_DONE).
When the motor is switched back on, it moves
automatically to the next position. The position
can be defined by the varying length of the
segments.
It must be observed that the motor continues
turning up to 30°.
dlabr020
4.3.10 2001-01-02 /PN 9009 AGFA d-lab.3