AGFA d-lab.3 Digital Compact Lab

Scanner
Repair
Negative Carrier NC
No. Designation Task Control
NC_LS01- Fork light sensor Negative carrier coding FL-Controller
NC_LS06
NC_LS07 Fork light sensor Position monitoring auxiliary drive LHS FL-Controller
NC_LS08 Fork light sensor Position monitoring auxiliary drive RHS FL-Controller
NC_MG01 Lifting magnet Magnet negative pressure FL-Contr, U = 24V FL-Controller
NC_MO01 Stepper motor 5 Ph. Film drive, U = 24V, Iph = 0,95A FL-Controller
NC_MO02 DC motor Position motor auxiliary drive LHS, U = 12V FL-Controller
NC_MO02_
DONE
— Signal from hardware that motor has been
stopped
NC_MO03 DC motor Position motor auxiliary drive RHS, U = 12V FL-Controller
NC_MO03_
DONE
— Signal from hardware that motor has been
stopped
Prescanner SC
No. Designation Task Control
SC_LS01 Fork light sensor Zero position monitoring Scanner carriage FL-Controller
SC_MO01 Stepper motor 5 Ph. Scanner carriage motor, U = 24V, Iph = 0,75A FL-Controller
CCD Group CG
No. Designation Task Control
CG_MO01 Motor Zoom: Chip rotation 90° CG-Controller
CG_FA01 Fan Cooling CCD (not switched) CG-Controller
Other Sensors
No. Designation Task
FILM_NOTAUS
FILM_FWD
FILM_REW
general keys Emergecy OFF switch
Film transport (advance)
Film transport (backward)
TEMP_ERR — Temperature control of the drivers for the stepper motors for film
advance and scanner on FD/SD output stage
4.2.4 2001-01-02 /PN 9009 AGFA d-lab.3