AGFA d-lab.3 Digital Compact Lab

Repair
Scanner
Mirror Box MB
No. Designation Task Control
MB_MO01 DC motor Mirror box motor (frosted glass flap),
FL-Controller
U = 12V
MB_LS01 Fork light sensor Position monitoring of mirror box motor (frosted FL-Controller
glass flap)
MB_COD — Mirror box coding Driver Sensor
MB_DONE — Signal from Hardware that the motor was stopped Driver Sensor
MB_OK — Signal that the mirror box has been pushed in Driver Sensor
Lens Group LG
No. Designation Task Control
LG_HS01 Temperature Temp. compensation for fixed focus lens sensor CG-Controller
sensor
on CCD Controller
Film Feeder FF
No. Designation Task Control
FF_LS01 Fork light sensor Feeder zero position monitoring (Init. Feeder FL-Controller
motor)
FF_LS02 Reflex-LS3 Detection whether film in Feeder FL-Controller
FF_LS04 Reflex-LS3 Detection whether film in front of gear FL-Controller
FF_LS05 Fork light sensor Detection gear up FL-Controller
FF_LS06 Fork light sensor Detection gear down FL-Controller
FF_LS07 Fork light sensor Detection film drive roller up FL-Controller
FF_LS08 Fork light sensor Detection film drive roller down FL-Controller
FF_MO01 2PH-Stepper 1,8° Feeder motor (film width adjustment)
FL-Controller
U = 24V, Iph= 0,9A
FF_MO02 2PH-Stepper 1,8° Film transport into Feeder, U = 24V, Iph= 0,9A FL-Controller
FF_MO03 DC motor Movement / Position of gear, Un = 12V FL-Controller
FF_MO04 DC motor Position of film drive roller, Un = 12V FL-Controller
AGFA d-lab.3 2001-01-02 /PN 9009 4.2.3