AGFA d-lab.3 Digital Compact Lab
AGFA d-lab.3 Digital Compact Lab AGFA d-lab.3 Digital Compact Lab
Introduction Repair Symbols The symbols that are used have the following meaning: − General description − Operating steps − Prerequisite − Note − Safety instructions − Reference to another chapter − Tools and measuring means Text Styles The following text parts are highlighted in bold letters / italic letters in the technical documentation: 1. Screen designations, e.g.: Example: Pressing OK will validate the displayed text and the Input screen is closed. 2. Designations of buttons, e.g.: Strike Reorder to handle reorders 3. Reference to other text parts in the technical documentation is indicated in italic letters, e.g.: See also the section Menu overview and Screen structure on the following pages. Safety Instructions The words Caution and Warning in the documentation and on the machine labels indicate the following risks: Caution! Low risk. Potentially dangerous situation. May cause minor injuries to persons or damage to property. Warning! Average risk. Possible danger. May cause severe injuries to persons and death. 1.2 2001-01-02 /PN 9009 AGFA d-lab.3
Repair Introduction Legal Situation The operation of the machines is ruled by the appropriate regulations for the place of installation in force in the country concerned. This technical documentation includes a EU conformity explanation (CE) about the harmonised standards that apply. Caution! The following safety regulations, warnings and instructions on machine labels must be observed by all means. The non-observance may be dangerous for persons, equipment and buildings: injuries, electric shocks, fire. The manufacturer and the service will not assume any responsibilities for accidents and damages resulting from incorrect operation. Copyright Copies of photographs, negatives and other pictures must not be made without the permission of the author. Under normal conditions, the Copyright is the property of the photographer. The one who orders the copy is not always the author of the material. Safety Prescriptions General Warning and instructions on machine stickers must be strictly observed. Safety devices: − Do not bypass or make inoperative built-in safety devices. − Do not modify presettings on safety components. − Replace fuses that have blown only by the same type of fuse: Value, switch-off characteristics. − Never modify the electrical switching circuit. AGFA d-lab.3 2001-01-02 /PN 9009 1.3
- Page 1 and 2: TECHNICAL DOCUMENTATION DD+18060022
- Page 3 and 4: List of Registers Edition Register
- Page 5 and 6: Repair Introduction Contents Use of
- Page 9: Repair Introduction Use of the Tech
- Page 13 and 14: Repair Introduction Handling Photoc
- Page 15 and 16: Repair Introduction All photographi
- Page 17 and 18: Repair Introduction Storage Chemica
- Page 19 and 20: Repair Basic Machine Contents Major
- Page 23 and 24: Repair Basic Machine Major Assembly
- Page 25 and 26: Repair Basic Machine Electrical Str
- Page 27 and 28: Repair Basic Machine Description Al
- Page 29 and 30: Repair Basic Machine Names of Assem
- Page 31 and 32: Repair Basic Machine Assembly group
- Page 33 and 34: Basic Machine Repair Signals dlab13
- Page 35 and 36: Repair Basic Machine Connection Pri
- Page 37 and 38: Repair Basic Machine Connections Fi
- Page 39 and 40: Repair Basic Machine RH Magazine Dr
- Page 41 and 42: Repair Basic Machine Sheet Gear SG
- Page 43 and 44: Repair Basic Machine Lane Distribut
- Page 45 and 46: Repair Basic Machine Mains Connecti
- Page 47 and 48: Repair Basic Machine Connections AG
- Page 49 and 50: Repair Basic Machine Power Supply (
- Page 51 and 52: Basic Machine Repair 55A-PWD (2/5)
- Page 53 and 54: Basic Machine Repair 55A-PWD (4/5)
- Page 55 and 56: Basic Machine Repair 55P-CNR 2.34 2
- Page 57 and 58: Basic Machine Repair 55P-IRC (1/2)
- Page 59 and 60: Basic Machine Repair 55P-MDV (1/4)
Repair<br />
Introduction<br />
Legal Situation<br />
The operation of the machines is ruled by the<br />
appropriate regulations for the place of installation<br />
in force in the country concerned.<br />
This technical documentation includes a EU<br />
conformity explanation (CE) about the<br />
harmonised standards that apply.<br />
Caution!<br />
The following safety regulations, warnings and<br />
instructions on machine labels must be<br />
observed by all means.<br />
The non-observance may be dangerous for<br />
persons, equipment and buildings: injuries,<br />
electric shocks, fire.<br />
The manufacturer and the service will not<br />
assume any responsibilities for accidents and<br />
damages resulting from incorrect operation.<br />
Copyright<br />
Copies of photographs, negatives and other<br />
pictures must not be made without the<br />
permission of the author. Under normal<br />
conditions, the Copyright is the property of the<br />
photographer. The one who orders the copy is<br />
not always the author of the material.<br />
Safety Prescriptions<br />
General<br />
Warning and instructions on machine stickers<br />
must be strictly observed.<br />
Safety devices:<br />
− Do not bypass or make inoperative built-in<br />
safety devices.<br />
− Do not modify presettings on safety<br />
components.<br />
− Replace fuses that have blown only by the<br />
same type of fuse: Value, switch-off<br />
characteristics.<br />
− Never modify the electrical switching circuit.<br />
<strong>AGFA</strong> d-<strong>lab.3</strong> 2001-01-02 /PN 9009 1.3