d-lab.1
d-lab.1
d-lab.1
SHOW LESS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Modification<br />
Capacitor Kit d-<strong>lab.1</strong><br />
On the LCD driver board remove the screw which holds the heat sink. This can be done only with a socket wrench<br />
5.5 mm. It is necessary to fix the screw from the other side.<br />
At the LCD driver board remove the flat cable, please be very careful!!<br />
1. First unlock the connector (see<br />
“1” in the picture.<br />
2. Pull the flat cable in the<br />
direction as shown (2)<br />
8 CM+9.8072.9003.0 AGFA d-<strong>lab.1</strong>
Change language