Lionel NW-2 diesel locomotive Owner's Manual

More documents

Recommendations

Info

Transformer operations Experiencing the range of your NW-2’s Railsounds system With Railsounds, you experience the sounds of real railroading like never before. Simply put, it’s the most sophisticated, authentic model railroad sound system in the world. • Four diesel-roar levels. Your NW-2’s speed determines the level of diesel RPM roar— automatically, if you prefer: idle, slow, medium, or full-speed output. • MultiHorn . A different horn sound every time—a Railsounds exclusive. • Mechanical bell. Press BELL on your CAB-1 or transformer to begin the effect; again to discontinue. • Full control of RPMs. Prefer hands-on control of diesel RPM roar? Want to “ramp up” RPMs before pulling out, just like real diesels do? It’s easy with Railsounds. Place your NW- 2 in neutral and increase track voltage to maximum. RPMs will continue to increase as long as the NW-2 remains in neutral, eventually reaching their highest level. Now, within 3 seconds, decrease track voltage to the desired speed level, press DIR on your CAB-1 remote or transformer, and head out with your NW-2 at full churn, just like the real thing. RPMs will remain at that level until the locomotive has come to a complete halt. Experiment with controllable RPMs—it’s a blast! Notes on Railsounds • Use the volume control knob in the radio wheel of the NW-2 to adjust sound output. (See page 11 for its location.) • Listen for incidental locomotive sounds during Railsounds operation. They’re automatic and, of course, authentic. • For even more authentic Railsounds effects, operate in the TrainMaster Command environment. 6
Transformer operations Installing the Lionel no. 610-5906-001 sound activation button For AC transformers with a horn/whistle button Black wire Customer’s wire to your transformer Red wire attach to ground terminal attach to power terminal Lionel no. 610-5906-001 sound activation button for activating the bell Note! All track power must feed through “Sound Activation Button” Do not bypass button For AC transformers lacking a horn/whistle button (two no. 5906s required) Red wire Black wire Red wire Attach to ground terminal to your transformer Attach to power terminal Lionel no. 610-5906-001 sound activation button (for horn) Lionel no. 610-5906-001 sound activation button (for bell) Note! The no. 610-5906-001 sound activation button (available separately) works with any Lionel AC transformer except no. 6-4690 Type MW. Transformers made by other manufacturers may not be compatible with Railsounds. 7
Page 1 and 2: 71-8978-250 1/00 Lionel NW-2 diesel
Page 3 and 4: Transformer operations Running your
Page 5: Transformer operations Your NW-2’
Page 9 and 10: TrainMaster Command operations Runn
Page 11 and 12: TrainMaster Command operations Tuni
Page 13 and 14: Maintaining and servicing your NW-2
Page 15 and 16: Maintaining and servicing your NW-2

Lionel NW-2 diesel locomotive Owner's Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?