7-in-One Home Theater Remote Control - Radio Shack
7-in-One Home Theater Remote Control - Radio Shack
7-in-One Home Theater Remote Control - Radio Shack
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
15-1935.fm Page 31 Thursday, December 31, 1998 11:37 AM<br />
TO OPERATE YOUR AMPLIFIER<br />
Locate the codes for your amplifiers <strong>in</strong> “Setup Codes for<br />
Amplifiers” on Page 32 and write them <strong>in</strong> the space below.<br />
The brands are listed <strong>in</strong> alphabetical order, with the<br />
most popular codes listed first.<br />
Codes: _____________________________________<br />
Then follow these steps to program the 7-<strong>in</strong>-<strong>One</strong> to operate<br />
your amplifier.<br />
1. Turn on your amplifier.<br />
2. Press AMP.<br />
3. Hold down SETUP until TIMED SEQ appears.<br />
4. Press MENU . CODE SETUP appears.<br />
5. Repeatedly press SELECT until AMP appears.<br />
6. Enter the first code listed for your amplifier’s brand<br />
then press SELECT.<br />
7. Po<strong>in</strong>t the 7-<strong>in</strong>-<strong>One</strong> at the amplifier and press<br />
POWER. Your amplifier should turn off. If it does<br />
not, enter the next code <strong>in</strong> the code list and press<br />
SELECT then POWER aga<strong>in</strong>. When the amplifier<br />
turns off, press ESC to stop programm<strong>in</strong>g.<br />
Need help? Call 1-800-763-9232<br />
31
Change language