VB Kitchen Sinks Price List 2013

Kitchen sink price list - 2013
Installation Instructions LUNA
LUNA 6766 11 and 6766 12
Instructions for installation in natural stone slabs (e.g. granite) with a minimum thickness of 25 mm.
We recommend the use of cementing materials specifically intended for natural stone. Please follow the manufacturer’s
instructions.
• 1. Installation accessories supplied: 4 fastening brackets, 4 M5 x 35 screws, 4 M5 x 30 screws, 4 MS dowels
• 2. Measure the INSIDE DIAMETER of the sink at several points.
Take 10 mm off the SMALLEST dimension ( i.e. so that the slab
will extend over the edge of the sink by approx. 5 mm all round).
The resulting dimension is the diameter of the circular hole
to be cut out for the sink.
• 4. Mark drilling holes on the slab at 15 mm from the outer edge
of the sink. Make sure that the brackets do not extend beyond
the sink to the right and left (to facilitate fitting in a 50 cm cabinet!).
Using a 6 mm carbide drill, drill the holes (without using
the percussion feature) to 18 mm, not countingthe tip,
preferably using a depth gauge attachment.
• 3. Determine where the sink is to be positioned on the slab and
cut out the hole. Lay the slab face down on an absolutely plane
and true, stable surface. Make sure that all surfaces top be cemented
are free of grease and otherwise clean and dry. Apply silicone rubber
to the ground rim of the sink. Lay the sink over the hole in the slab
and align. Remove any excess sealant.
• 5. Insert the MS special dowels enclosed flush into the holes.
Attach the fastening brackets with the screws supplied to the
sink and slab. Tighten the screws by hand with a screwdriver.
(Do not use a torque lever).
71