MicroVertex G4 A Quick Users Guide 2007 - R&M Materials ...

More documents

Recommendations

Info

R&M Materials Handling, Inc. 4501 Gateway Boulevard Springfield, Ohio 45502 : (800) 955-9967 www.rmhoist.com PRINTING There are two different ways to print the drawing from QuoteMaster ® . Printing from the Print Manager One way to print the drawing is through the Print in Word/Vertex command in the Print Manager window. This command prints the drawing without opening the drawing in the working window. A onetime setup of the printer properties is required to give the printer a share name of CRANE before the Print in Word/Vertex command can be used. To set up the printer properties with a share name, do the following: 1. Click on My Computer from the desktop. 2. Click on the Printers folder. 3. Highlight the printer in the folder that will be used to print the drawing. 4. Click File 5. Click Properties 6. Click the Sharing -tab 7. Click Share the printer 8. Write CRANE to Share name line 9. Click OK Note: Word documents printed through QuoteMaster ® will print automatically to your “Default” printer and does not use the printer named “CRANE” unless that printer is your “Default” printer. R&M Materials Handling Inc. reserves the right to alter or amend the above information without notice Page 6 of 31 7/10/2007
R&M Materials Handling, Inc. 4501 Gateway Boulevard Springfield, Ohio 45502 : (800) 955-9967 www.rmhoist.com Printing from the Working Window Another way to print the drawing is from the working window. Click Edit in Word/Vertex in the Print Manager window to open the working window. 1 1. Click File in the toolbar. 2. Select Print to open the print drawing screen. 2 R&M Materials Handling Inc. reserves the right to alter or amend the above information without notice Page 7 of 31 7/10/2007
Page 1 and 2: R&M Materials Handling, Inc. 4501 G
Page 3 and 4: INTRODUCTION R&M Materials Handling
Page 5: R&M Materials Handling, Inc. 4501 G
Page 15 and 16: DIMENSIONING R&M Materials Handling
Page 31: R&M Materials Handling, Inc. 4501 G

MicroVertex G4 A Quick Users Guide 2007 - R&M Materials ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?