MicroVertex G4 A Quick Users Guide 2007 - R&M Materials ...
MicroVertex G4 A Quick Users Guide 2007 - R&M Materials ...
MicroVertex G4 A Quick Users Guide 2007 - R&M Materials ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
R&M <strong>Materials</strong> Handling, Inc.<br />
4501 Gateway Boulevard<br />
Springfield, Ohio 45502<br />
: (800) 955-9967<br />
www.rmhoist.com<br />
3. Select Sheet tab for the Drafting Settings window.<br />
4. Click on Set 10% Oversize button.<br />
3<br />
4<br />
Set 0.5 mm Oversize<br />
Automatically sets the drawing area in the drawing. Vertex will set the borders so that all<br />
the elements are inside the borders of the drawing area, and add a 0.5 mm margin.<br />
Set 10% Oversize<br />
Automatically sets the drawing area in the drawing. Vertex will set the borders so that all<br />
the elements are inside the borders of the drawing area, and add a 10% margin.<br />
R&M <strong>Materials</strong> Handling Inc. reserves the right to alter or amend the above information without notice Page 24 of 31 7/10/<strong>2007</strong>
Change language