Download - R&M Materials Handling equipment
Download - R&M Materials Handling equipment
Download - R&M Materials Handling equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R&M <strong>Materials</strong> <strong>Handling</strong>, Inc.<br />
4501 Gateway Boulevard<br />
Springfield, Ohio 45502<br />
P.: (937) 328-5100<br />
FAX: (937) 325-5319<br />
T.3 Output frequency Hz<br />
T.4 Motor current A<br />
T.5 Motor voltage V<br />
T.6 Motor power %<br />
T.7 Motor torque %<br />
T.8 DC voltage V<br />
T.9 Unit temperature °C<br />
T.10 Ready<br />
0=Not Ready 1=Ready<br />
Run<br />
0=Not Running 1=Run<br />
T.11 Direction<br />
0=Off 1=On<br />
Fault<br />
0=No 1=Yes<br />
T.12 Warning<br />
0=No 1=Yes<br />
At reference<br />
0=No 1=Yes<br />
T.13 0-speed 0=Not Zero Speed<br />
1=Zero Speed<br />
M8 Fault history<br />
The fault memory can store a maximum of 30 faults in the order of<br />
appearance. The number of faults currently in the fault history is shown<br />
on the value line of the main page. The order of the faults is indicated<br />
by the location indication in the upper left corner of the display. The<br />
latest fault carries the indication F8.1, the second latest F8.2 etc. The<br />
Fault time data record pages are accessible at each fault. If there are<br />
30 uncleared faults in the memory, the next occurring fault will erase<br />
the oldest from the memory.<br />
Pressing the Enter button for about 2 to 3 seconds resets the whole<br />
fault history.<br />
37/79<br />
This document and the information contained herein, is the exclusive property of R&M <strong>Materials</strong> <strong>Handling</strong> Inc. and represents a non-public, confidential and proprietary<br />
trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M<br />
<strong>Materials</strong> <strong>Handling</strong> Inc. Copyright © (2005) R&M <strong>Materials</strong> <strong>Handling</strong> Inc. All rights reserved.