Download - R&M Materials Handling equipment
Download - R&M Materials Handling equipment
Download - R&M Materials Handling equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R&M <strong>Materials</strong> <strong>Handling</strong>, Inc.<br />
4501 Gateway Boulevard<br />
Springfield, Ohio 45502<br />
P.: (937) 328-5100<br />
FAX: (937) 325-5319<br />
After a time delay (normally 0.3s), the delayed contact of the brake contactor opens, which disconnects the<br />
supply from terminal 3 and the rectifier changes to a half wave type. Half wave operation prevents heating of<br />
the brake coil and is enough to keep the brake open.<br />
To close the brake, the brake contactor disconnects the supply to terminals 1 and 2. The released brake<br />
contactor also opens the brake coil DC-circuit, which speeds closing of the brake. The purpose of the varistor<br />
there is overvoltage protection for K7 contacts and the brake coil.<br />
26/79<br />
This document and the information contained herein, is the exclusive property of R&M <strong>Materials</strong> <strong>Handling</strong> Inc. and represents a non-public, confidential and proprietary<br />
trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M<br />
<strong>Materials</strong> <strong>Handling</strong> Inc. Copyright © (2005) R&M <strong>Materials</strong> <strong>Handling</strong> Inc. All rights reserved.