User's Guide HDSP AES-32 - RME

29. Technical Specifications
29.1 Inputs
AES/EBU
• 8 x, transformer balanced, ground-free, according to AES3-1992
• High-sensitivity input stage (< 0.3 Vpp)
• SPDIF compatible (IEC 60958)
• Accepts Consumer and Professional format, copy protection will be ignored
• Single Wire: 8 x 2 channels 24 bit, up to 192 kHz
• Double Wire: 8 x 2 channels 24 bit 96 kHz, equalling 8 channels 192 kHz
• Quad Wire: 8 x 2 channels 24 bit 48 kHz, equalling 4 channels 192 kHz
• Lock range: 28 kHz - 204 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
• BNC, not terminated (10 kOhm)
• Internal jumper for 75 Ohm termination
• Automatic Double/Quad Speed detection and conversion to Single Speed
• SteadyClock guarantees super low jitter synchronization even in varispeed operation
• Transformer coupled, galvanically isolated input
• Not effected by DC-offsets within the network
• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
• Overvoltage protection
• Level range: 1.0 Vss – 5.6 Vpp
• Lock range: 28 kHz – 204 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
29.2 Outputs
AES/EBU
• 8 x, transformer balanced, ground-free, according to AES3-1992
• Output voltage Professional 4.5 Vpp, Consumer 2.1 Vpp
• Format Professional according to AES3-1992 Amendment 4
• Format Consumer (SPDIF) according to IEC 60958
• Single Wire: 8 x 2 channels 24 bit, up to 192 kHz
• Double Wire: 8 x 2 channels 24 bit 96 kHz, equalling 8 channels 192 kHz
• Quad Wire: 8 x 2 channels 24 bit 48 kHz, equalling 4 channels 192 kHz
Word Clock
• 1 x BNC
• Max. output voltage: 5 Vpp
• Output voltage @ 75 Ohm termination: 4.0 Vpp
• Output impedance: 10 Ohm
• Frequency range: 28 kHz – 204 kHz
User's Guide HDSP AES-32 © RME 69