Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
When Full LC Display Support is turned off, only a brief information about the first fader of the<br />
block (channel and row) is sent. This brief information is also available on the LED display of<br />
the Behringer BCF2000.<br />
Tip for Mac OS X users: LC Xview (www.opuslocus.com) provides an on-screen display<br />
emulating the hardware displays of a Logic/Mackie Control, for use with controllers that can<br />
emulate a Logic/Mackie Control but do not have a display. Examples include the Behringer<br />
BCF2000 and Edirol PCR series.<br />
Deactivate MIDI in Background (menu Options) disables the MIDI control as soon as another<br />
application is in the focus, or in case TotalMix has been minimized. This way the hardware controller<br />
will control the main DAW application only, except when TotalMix is in the foreground.<br />
Often the DAW application can be set to become inactive in background too, so that MIDI control<br />
is switched between TotalMix and the application automatically when switching between<br />
both applications.<br />
TotalMix also supports the 9th fader of the Mackie Control. This fader (labeled Master) will control<br />
the stereo output faders (lowest row) which are set up as Main Monitor outputs in the Monitor<br />
panel. Always and only.<br />
27.4 Mapping<br />
TotalMix supports the following Mackie Control surface elements*:<br />
Element:<br />
Channel faders 1 – 8<br />
Master fader<br />
SEL(1-8) + DYNAMICS<br />
V-Pots 1 – 8<br />
pressing V-Pot knobs<br />
CHANNEL LEFT or REWIND<br />
CHANNEL RIGHT or FAST FORWARD<br />
BANK LEFT or ARROW LEFT<br />
BANK RIGHT or ARROW RIGHT<br />
ARROW UP or Assignable1/PAGE+<br />
ARROW DOWN or Assignable2/PAGE-<br />
EQ<br />
PLUGINS/INSERT<br />
STOP<br />
PLAY<br />
PAN<br />
MUTE Ch. 1 – 8<br />
SOLO Ch. 1 – 8<br />
SELECT Ch. 1 – 8<br />
REC Ch. 1 – 8<br />
Meaning in TotalMix:<br />
volume<br />
Main Monitor channel's faders<br />
reset fader to Unity Gain<br />
pan<br />
pan = center<br />
move one channel left<br />
move one channel right<br />
move eight channels left<br />
move eight channels right<br />
move one row up<br />
move one row down<br />
Master Mute<br />
Master Solo<br />
Dim Main Monitor<br />
Talkback<br />
Mono Main Monitor<br />
Mute<br />
Solo<br />
Select<br />
in Submix mode only: select output bus<br />
F1 - F8 load preset 1 - 8<br />
F9<br />
select Main Monitor<br />
F10 - F12 Monitor Phones 1 - 3<br />
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie<br />
Control under Mac OS X.<br />
64 <strong>User's</strong> <strong>Guide</strong> <strong>HDSP</strong> <strong>AES</strong>-<strong>32</strong> © <strong>RME</strong>