MenzelMetallchemie INDUOIL® HL INDUTEC® MS - Ridix

INDUOIL ® HL High Performance Oils Overview
Designation Product Description Material Environment
INDUOIL ® HL 1
Totally residue-free, self-ventilating, cutting, stamping and shaping
fluid based on aliphatic hydrocarbons.
Non-ferrous metals (AL, CU)
electric contact materials
AS 13 02 05
WGK 1
INDUOIL ® HL 2
A low-viscosity, totally residue-free, self venting special lubricant
based on aliphatic hydrocarbons.
Non-ferrous metals (AL, CU)
electric contact materials
AS 13 02 06
WGK 1
INDUOIL ® HL 3
Low-residue hydrocarbon mix formulated with synthetic
lubricating enhancers.
Non-ferrous metals (Al), non-alloy
and alloy steels (ST, V2A), Plexiglas,
Makrolon, plastic, wooden materials,
electric contact materials, heavy metals
AS 13 02 06
WGK 1
INDUOIL ® HL 4
Low-residue stamping, cutting and shaping coolant with excellent
lubricating properties.
Non-ferrous metals (Al), heavy metals,
non-alloy/alloy steels (ST, V2A),
electric contact materials
AS 13 02 06
WGK 1
INDUOIL ® HL 6
Low-viscosity, almost residue-free self venting speciallubricant based
on aliphatic hydrocarbons.
Non-ferrous metals (AL, CU)
electric contact materials
AS 13 02 06
WGK1
INDUOIL ® HL 20
INDUOIL ® HL 22
High performance oil based on special fatty alcohols with outstanding
adhesive and lubricating properties, suited to a wide range of
applications.
Special cutting and shaping oil based on pharmaceutical white oils
with good adhesive and pressure absorbing characteristics.
Non-ferrous metals (Al, Cu), heavy
metals, alloy steels (ST)
Non-alloy, alloy and high-alloy steels,
Non-ferrous metals (Al, Cu, Ti), alloys
(MS), cast iron/grey iron
INDUOIL ® HL 40 Mid-viscosity, vegetable-based cutting and deep drawing oil. Non-ferrous metals (Al, Cu), non-ferrous
metals, alloy steels (up to STK60),
electric contact materials
INDUOIL ® HL 42
INDUOIL ® HL 45
INDUOIL ® HL 55
INDUOIL ® HL 80
INDUOIL ® HL 95
High performance cutting, stamping and shaping oil based on food
safe vegetable oils, with a highly effective combination of additives and
outstanding wetting and lubricating properties.
Special cutting oil, highly activated with active EP agents to enhance
lubrication.
Fine stamping, deep drawing and shaping medium based on food safe
vegetable oils, with a highly effective combination of additives.
Totally universal high-viscosity stamping, cutting and shaping oil with
maximum possible adhesion and good pressure absorbing characteristics,
based on pharmaceutical white oils. Delivers the best results,
even when used with materials with a high carbon content.
High-viscosity universal stamping, cutting and shaping oil with above
average adhesion.
Non-alloy and high-alloy steels (see
HL 95), non-ferrous metals (Al), heavy
metals
Non-ferrous metals (Al), heavy metals,
non-alloy/alloy steels
Non-ferrous metals (Al), non-alloy,
alloy and high alloy steels (ST)
Non-ferrous metals (Al), non-alloy, alloy
and high alloy steels, heavy metals
Non-alloy and high-alloy steels
(RST 37-3, ZSTE 52, C60, CK60, 42CrMo4
and X10 and CrNiMoTi), non-ferrous
metals (Al)
AS 13 02 07
Not water
polluting
AS 13 02 05
WGK 1
AS 13 02 07
WGK 1
AS 13 02 07
WGK1
AS 13 02 07
WGK2
AS 13 02 07
WGK2
AS 13 02 05
WGK 1
AS 13 02 07
WGK1
54
The details provided here are based on our current level of knowledge but are not guarantees of product characteristics and form no basis for contractual legal relationships.