MenzelMetallchemie INDUOIL® HL INDUTEC® MS - Ridix

Accessories for Pressure Vessels
AUTOMATIC CONVERSION FOR TWO VESSELS
Conversion kit for automatic conversion without any interruption of processes
consisting of:
> 3/2-way solenoid valve (M04) including sound absorber, 1/8“ with seal, detachable 1/8“ - 1/8“
double nipple (already stuck in place)
> 1 x WEV-8 1/8, 1/8“ elbow male connector, rotatable, for Ø 8mm hoses (input air)
complete with 24V/DC coil, incl. connector plug and counter nut
Already assembled onto the pressure vessel head at the factory to enable automatic disconnection/
switchover of input air.
Important: Standpipe with non-return valve must be present in both vessels.
Filling level controller with 1 point is sufficient
Order no.: INDUTEC ® MS MV 3/2 SP AUTO
PNEUMATIC STIRRING UNIT
For pressure vessel units with capacities between 1 litre and 20 litres
Order no.: INDUTEC ® MS RW1
Order no.: INDUTEC ® MS RW2
Order no.: INDUTEC ® MS RW6
Order no.: INDUTEC ® MS RW10
Order no.: INDUTEC ® MS RW20
for 1-litre pressure vessel unit
for 2-litre pressure vessel unit
for 6-litre pressure vessel unit
for 10-litre pressure vessel unit
for 20-litre pressure vessel unit
MEDIUM POURING DEVICE
Pouring device with filter for all pressure vessel unit. Mesh size: 0.2mm
Order no.: INDUTEC ® MS EH N
VISUAL FILLING LEVEL CONTROLLER, ON THE SIDE
Filling level controller, visual, mounted on the side
For vessels with capacities between 1 litre and 40 litres
26
Order no.: INDUTEC ® MS D1 VS
Order no.: INDUTEC ® MS D2 VS
Order no.: INDUTEC ® MS D6 VS
Order no.: INDUTEC ® MS D10 VS
Order no.: INDUTEC ® MS D20 VS
Order no.: INDUTEC ® MS D40 VS
for 1-litre pressure vessel unit
for 2-litre pressure vessel unit
for 6-litre pressure vessel unit
for 10-litre pressure vessel unit
for 20-litre pressure vessel unit
for 40-litre pressure vessel unit