MenzelMetallchemie INDUOIL® HL INDUTEC® MS - Ridix

Rate of Flow
MATERIAL FLOW RATES
Depending on the flow control valve settings or the precision screw-in union settings and the technical requirements, the INDUTEC ® MS SD3 & SD4 Coaxial
Spraying Heads can produce the following material flow rates:
Control air pressure:
Medium:
Hoses:
6 bar (without spraying air)
Water
1 m each
Medium pressure in bars In-head cartridge 0,5 1,0 1,5
Flow rate in ml/min
(adjustable)
ø 0,1 mm 0 – 2,2 0 – 3,5 0 – 4,5
ø 0,2 mm 0 – 18 0 – 26 0 – 32
ø 0,3 mm 0 – 42 0 – 62 0 – 72
ø 0,4 mm 0 – 61 0 – 93 0 – 114
ø 0,5 mm 0 – 92 0 – 140 0 – 180
ø 0,6 mm 0 – 124 0 – 188 0 – 232
ø 1,0 mm 0 – 190 0 – 270 0 – 342
Depending on the viscosity and the consistency of the medium, as well as on the adjustable vessel pressure (up to 2.5 bar with standard models and 6.0 bar
with custom models), a variety of flow rates can be achieved.
AIR FLOW RATE
Depending on the flow control valve settings or the precision screw-in union settings and the technical requirements, the INDUTEC ® MS SD3 & SD4 Coaxial
Spraying Heads can produce the following (spraying air) current volume flow rates:
Hoses:
1 m each
Spraying air pressure in bars 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0
Flow rate in ml/min
(adjustable)
0 – 12 0 – 24 0 – 34 0 – 44 0 – 51 0 – 58 0 – 65 0 – 73 0 – 80 0 – 88 0 – 97 0 – 106
A spraying air rate of approx. 180 l/min can be achieved by adding the INDUTEC ® MS FD4 Z2 Coaxial Spraying Head.
16