CONTENTS - Reptips

PINNING
1. Audio clock output (18.432 MHz)
2. Not connected
3. Not connected
4. D_CTR_I/O_1
5. D_CTR_I/O_0
6. I2C Bus address select
7. Stand-by (low-active)
8. Not connected
9. I2C clock
10. I2C data
11. I2S clock
12. I2S word strobe
13. I2S data output
14. I2S1 data input
15. ADR data output
16. ADR word strobe
17. ADR clock
18. Digital power supply 5 V
19. Digital ground
20. I 2 S2-data input
21. Not connected
22. Not connected
23. Not connected
24. Power-on-reset
25. Headphone out, right
26. Headphone out, left
27. Reference ground 2
28. Loudspeaker out, right
29. Loudspeaker out, left
30. Not connected
31 Subwoofer output
32 Not connected
33 SCART output 2, right
34 SCART output 2, left
35 Reference ground 1
36 SCART output 1, right
37 SCART output 1, left
38 Volume capacitor AUX
39 Analog power supply 8 V
40 Volume capacitor MAIN
41 Analog ground
42 Analog reference voltage
43 SCART 4 input, left
44 SCART 4 input, right
45 Analog Shield Ground 4
46 SCART 3 input, left
47 SCART 3 input, right
48 Analog Shield Ground 2
49 SCART 2 input, left
50 SCART 2 input, right
51 Analog Shield Ground 1
52 SCART 1 input, left
53 SCART 1 input, right
54 Reference voltage IF A/D converter
55 Mono input
56 Analog ground
57 Analog power supply 5 V
58 IF input 1
59 IF common (can be left vacant, only if IF input 1 is also not in use)
60 IF input 2 (can be left vacant, only if IF input 1 is also not in use)
61 Test pin
62 Crystal oscillator
63 Crystal oscillator
64 Test pin
20