SERVICE MANUAL - O. Rensch OHG

2DC-1
1-6-7 Removing the principal circuit boards
(1) Removing the engine board
1. Remove the right cover (See pages1-6-4).
2. Remove all (twelve) connectors from the engine board.
3. Remove three screws.
4. Remove the engine board.
* When replacing the board with a new board,
remove the EEPROM from the old board and
mount it to the new board.
Engine board
Screws
EEPROM
Figure 1-6-11 Removing the engine board
1-6-9