SERVICE MANUAL - O. Rensch OHG

2DC
Problem Causes/check procedures Corrective measures
(9)
A paper jam in the
exit section is indicated
during copying
(jam in the exit
section).
Jam code 50
Defective registration sensor.
Defective exit sensor.
Check if the lower exit
roller and exit pulleys contact
each other.
Run maintenance item U031 and turn registration sensor on and
off manually. Replace registration sensor if indication of the corresponding
sensor is not light.
Run maintenance item U031 and turn exit sensor on and off
manually. Replace exit sensor if indication of the corresponding
sensor is not light.
Check visually and remedy if necessary.
Check if the upper exit
roller and exit pulleys contact
each other.
Check visually and remedy if necessary.
1-5-6