SERVICE MANUAL - O. Rensch OHG
SERVICE MANUAL - O. Rensch OHG
SERVICE MANUAL - O. Rensch OHG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2DC<br />
Section<br />
Fixing and<br />
cleaning<br />
Operation<br />
panel and<br />
support<br />
equipment<br />
Mode setting<br />
Image<br />
processing<br />
Others<br />
Item<br />
Initial<br />
Maintenance item contents<br />
No.<br />
setting*<br />
U161 Setting the fixing control temperature<br />
• Primary stabilization fixing temperature 125<br />
• Secondary stabilization fixing temperature 135<br />
• Copying operation temperature 1 180<br />
• Copying operation temperature 2 195<br />
• Number of sheets for fixing control 5<br />
U162 Stabilizing fixing forcibly —<br />
U163 Resetting the fixing problem data —<br />
U199 Checking the fixing temperature —<br />
U200 Turning all LEDs on —<br />
U203 Operating DP separately —<br />
U207 Checking the operation panel keys —<br />
U243 Checking the operation of the DP motors —<br />
U244 Checking the DP switches —<br />
U252 Setting the destination Europe<br />
U254 Turning auto start function on/off On<br />
U255 Setting auto clear time 90<br />
U258 Switching copy operation at toner empty detection Single mode<br />
U260 Changing the copy count timing After ejection<br />
U265 Setting the destination specifications 0<br />
U332 Setting the size conversion factor 1.0<br />
U342 Setting the ejection restriction On<br />
U402 Adjusting margins for printing —<br />
U403 Adjusting margins for scanning an original on the contact glass —<br />
U404 Adjusting margins for scanning an original from the DP —<br />
U901 Checking/clearing copy counts by paper feed locations —<br />
U903 Checking/clearing the paper jam counts —<br />
U904 Checking/clearing the service call counts —<br />
U905 Checking/clearing counts by the DP —<br />
U908 Checking the total count —<br />
U910 Clearing the black ratio data —<br />
U911 Checking/clearing copy counts by paper size —<br />
U927 Clearing accounting counter —<br />
U990 Checking/clearing the time for the exposure lamp to light —<br />
U991 Checking the scanner count —<br />
U993 Outputting a VTC-PG pattern —<br />
* Initial setting for executing maintenance item U020<br />
1-4-3
Change language