SERVICE MANUAL - O. Rensch OHG

2DC
9. Hold the process unit stable and push in on the
areas of the toner container marked “PUSH
HERE” until the container clicks into place in the
process unit.
Toner container
10. Push the lock lever back into its locked position.
Figure 1-3-17
Lock lever
Figure 1-3-18
11. Set the process unit into the copier by aligning
the pins on both sides of the process unit with the
guides inside the copier, and then slide the
process unit all the way back into the copier until
it stops.
Pin
Pin
Figure 1-3-19
1-3-9