SERVICE MANUAL - O. Rensch OHG

2DC
1-6-13 Removing the exposure lamp
1. Remove the ISU unit (See page 1-6-32).
2. Remove the two connectors from the inverter
board.
3. Remove the one screw and then remove the
inverter board.
ISU unit
Inverter board
Connectors
Screw
Figure 1-6-39 Removing the inverter board
4. While unhooking the hook and then slide the
exposure lamp mount.
Exposure lamp mount
ISU unit
Hook
Figure 1-6-40 Removing the exposure lamp mount
1-6-34