RJ Series Slim Power Relays SJ Series Relay ... - REM-Technik sro

More documents

Recommendations

Info

RJ Series Relay Sockets Dimensions • SJ1S-05B M3 Terminal Screws • SJ2S-05B M3 Terminal Screws (Top View) ø5.6 2 29.7 21.5 60 49.5 35.5 15.5 29.7 60 4.3 71 2 29.7 60 15.5 6 ø4 4.3 71 2 15.5 6 ø4 5 (A2) (A1) 1 2 (12) 3 (14) 4 (11) 8 (A2) (A1) 1 (22) 7 2 (12) (24) (14) 5 4 6 (21) (11) 3 (Top View) • SJ1S-07L M3 Terminal Screws • SJ2S-07L M3 Terminal Screws ø5.6 4.3 71 ø3 2 29.7 21.5 60 49.5 35.5 15.5 4.3 71 ø3 5 (A2) 3 (14) (11) 4 (A2) 8 (21) 5 7 6 (24) (22) 1 (A1) 2 (12) 1 (A1) (14) 4 (12) 2 3 (11) (Top View) (Top View) All dimensions in mm. Replacement Parts Description Material Type No. Ordering Type No. Package Quantity Release Lever Plastic (gray) SJ9Z-C SJ9Z-CPN05 5 Accessories Description Appearance Material Type No. DIN Rail Mounting Clip Aluminum Weight: Approx. 200 g Steel Weight: Approx. 200 g Metal (zinc plated steel) Weight: Approx.15 g BAA1000 BAP1000 BNL5 BNL6 Ordering Type No. BAA1000PN10 BAP1000PN10 BNL5PN10 BNL6PN10 Package Quantity 10 Note Length: 1 m Width: 35 mm Used on a DIN rail to fasten relay sockets. (Note) DIN Rail Spacer Plastic (black) SA-406B SA-406B 1 Thickness: 5 mm Used for adjusting spacing between sockets mounted on a DIN rail 10
RJ Series Relay Sockets Instructions Installing relays 1. Unlock the release lever by pulling down as shown with arrow ➀. 2. Press relay against the socket as shown with arrow ➁. Make sure that the relay is firmly in place. 3. Confirm that the relay is securely installed in the socket. When installed properly, the relay and the socket look as shown in ➂. ➀ ➁ Removing the release lever • Pull down the release lever to the direction shown by the arrow until it touches the socket. Pull down further, and the lever will be detached from the socket. Caution • Make sure that the relay has been removed from the socket before removing the release lever. If the release lever is removed when the relay is installed on the socket, the relay may fall out. Installing the release lever • Position the release lever and the socket as shown below, and press in the lever in the direction shown by the arrow. Release lever Rotating axis on the socket Tab holds the relay firmly. ➂ Latch is inserted into the groove on top of the relay. The tab does not hold the relay. The latch is not inserted into the groove on top of the relay. Press the release lever toward the socket. Axis Correct Incorrect Caution • Ensure that the relay is installed in the socket completely. When installed loosely, the relay may fall out, resulting in possible damage to the relay. • When installing, take care that your finger is not caught between the relay and the socket. Removing the relay • Pull down the release lever until the relay pops out of the socket. Take care that your finger is not caught between the release lever and the socket. Standard Type Finger-safe Type Rotating axis on the socket Release lever and the socket are pre-positioned. Panel mounting • Remove the release lever according to the instructions shown above. Insert the anti-rotation projection into the anti-rotation hole. Mount the socket onto the panel using M3 screws (not provided). Reinstall the release lever. Mounting Hole Layout (SJ1S-05B, SJ2S-05B) Screw Hole ø3.5 hole 30.0 ±0.1 ø4.2 hole (or M3 hole) (anti-rotation hole) (SJ1S-07L, SJ2S-07L) ø3.5 hole (or M3 hole) 39.5 ±0.1 ø3.2 hole (anti-rotation hole) Anti-rotation Projection Caution • When installing the sockets, tighten the screws with a torque of 1.0 N·m maximum. Do not tighten with excessive torque, otherwise the socket will be damaged. Caution • The release lever is removable. Do not apply excessive force, otherwise the lever is removed from the socket causing the relay to fall out. Applicable Screwdriver • Standard Screw Terminal Type Phillips: ø6.4 mm maximum Slotted: Shown at right • Finger-safe Screw Terminal Type Phillips: ø5.5 mm maximum Slotted: Shown at right 0.8 mm max. 6.0 mm max. Diameter: ø6.0 mm max. Diameter: ø5.5 mm max. 0.8 mm max. 5.5 mm max. 11
Page 1 and 2: RJ/SJ RJ Series Slim Power Relays S
Page 3 and 4: SJ Series Relay Sockets Slim socket
Page 5 and 6: RJ Series Slim Power Relays UL Rati
Page 7 and 8: RJ Series Slim Power Relays Electri
Page 9: SJ Series Relay Sockets Slim, space

RJ Series Slim Power Relays SJ Series Relay ... - REM-Technik sro

Create successful ePaper yourself

Delete template?

Save as template?