Rapid EURO meets stringent demands, can be ... - Rapid Technic AG

Rapid EURO
meets stringent demands,
can be custom configured
Winter services
Mowing/forage harvesting
Mulching
Tilling
Green/paved area maintenance
Spraying/spreading
Transport

Rapid EURO – tried-and-tested, efficient
and tailored to your needs
You can configure the Rapid EURO to suit your own particular needs.
The EURO 3 model is based on a hydrostatic travel drive with a differential,
whereas the EURO 4 features active hydraulic steering as well.
In the case of both models, you are free to specify the engine type,
axle width and tyres etc. Having a walk-behind tractor that is precisely
tailored to your application enables you to work professionally while
making efficient use of your budget.
Technical specifications
Engine type Petrol Diesel
Engines Briggs & Stratton Vanguard, 4-stroke OHV Hatz
Cylinders 1 2 1
Cubic capacity 391 cm 3 480 cm 3 627 cm 3 462 cm 3
Power 13 HP/9.5 kW 16 HP/11.8 kW 21 HP/15.4 kW 10.5 HP/7.7 kW
Ability to handle
slopes
100% 80%
Weight EURO 3
(incl. AS 5.00-10)
190 kg 197 kg 205 kg 227 kg
Weight EURO 4
(incl. AS 6.00-12)
210 kg 217 kg 225 kg 237 kg
Starter
Manual recoil starter, petrol engines optionally available with electric starter
Travel drive
Hydrostatic, continuous speed adjustment forwards and in reverse
Speed
Forwards: 0 – 8 km/h, reverse: 0 – 4 km/h, optionally with EURO 3: 0 – 12 km/h*
Power take-off 700 and 1000 rpm
Clutch
Mechanically actuated single-plate dry clutch
Steering EURO 3 No active steering, differential with lock
Steering EURO 4 Active hydraulic hand lever steering, gradual action
Free wheel change Yes, can be towed
Connection flange Tool-free quick change system Ø 78/80
Handlebar
Height-adjustable without tools (11 positions), optional lateral adjustment
Immobilisation brake
Mechanical, acts on both wheels
*Values may vary depending on tyres
The keys to success
• Robust tried-and-tested walk-behind
tractor that can be configured according
to individual needs
• Powerful engines up to 21 HP / 15.4 kW
• Hydrostatic travel drive for continuously
variable forward and reverse travel
• Active hand lever steering for easy and
precise steering even when working on
steep slopes
• Two power take-off speeds
• Feedrate reduction that acts on the
travel drive for precise work at low
speeds
• Tool-free handlebar height adjustment
with 11 positions
Nikolaus Bertel, farmer and provider
of agricultural services, Blons, Austria
"Our three Rapid Euro machines put in
more than 1000 hours of work every year.
Thanks to the high level of reliability, perfect
services can be provided at all times on the
basis of easy-to-calculate prices."

Travel drive reduction
Allows the speed to be reduced continuously during forward
travel. This makes it easier to carry out tasks that call for very
slow and precise travel speeds (such as snow throwing).
Power take-off control
The power take-off, which is mechanically coupled to the motor
speed, can be easily switched on and off via the hand lever.
Handlebar height adjustment
Handlebar height can be adjusted precisely in accordance
with the operator's needs without any need for tools.
Jack ring
For safe lifting and fastening.
Storage area
The handy tool compartment is
big enough to hold everything
you need for daily maintenance.
Mechanical free wheel change
Allows you to manoeuvre and tow
the machine without starting up the
engine.
Quick change system
Allows you to change the various
attachments in a flash and
without any need for tools.
Additional weights
Optional additional weights for improved traction
or to counterbalance heavy attachments. The
weights are easy to mount or remove by hand.
Tyres
Flexible range of tyres and combination
options tailored to your needs for optimum
traction whatever the application.
Tyre types and associated total widths (other types on request)
External intake port
The optional external intake port reduces
the amount of dust that gets
drawn in when working in extremely
dusty environments. The fine-meshed
strainer is located within the operator's
field of vision, can be cleaned during
travel and ensures optimum engine
cooling.
AS 5.00-10
770/940/
1110 mm
AS 6.00-12
870/1040/
1210 mm
BR 23x8.50-12
875/975/1045/
1145/1215 mm
BR 21x11.00-8
968/1138/
1308 mm
RB 23x8.50-12
875/975/1045/
1145/1215 mm
RB 18x7.00-8
780/950/
1120 mm

Immobilisation brake
The immobilisation brake
acts mechanically on both
wheels, thereby ensuring
complete safety and peace
of mind.
Accelerator lever
For setting the
motor speed.
Rotary grip
Continuously variable forward or
reverse travel without any need for
clutch operation and gear shifting.
Handlebar end adjustment
Knurled screws allow you to
adjust the handlebar ends quickly
and without tools so that you
can work safely and ergonomically
on difficult terrain whatever
the situation.
Dead man handle
If, for any reason, the operator lets
go of the dead man handle, the
engine switches off immediately in
the interest of safety.
Clutch lever
Engine
There is a choice of easy-start
powerful petrol and diesel
engines that represent the
state of the art in terms of
performance and emissions.
Clutch lever with locking catch
for starting the engine and
switching the power take-off on
and off.
Hand lever steering
As soon as you operate the
hand lever, active steering is
enabled. The drive wheels then
rotate at different speeds so that
precise manoeuvres can be carried
out with ease. This saves
wearing out the operator and is
also good for the ground.
Additional hydraulics
The optional additional hydraulics
feature dual acting control
units. This means that attachments
such as snowploughs or
heavy tilling implements can be
operated easily via the handle bar
during travel.
12" 10" 12" 10"
1100/1270/1440 mm
1200/1370/1540 mm
–
1285/1455/1625 mm
1212/1382/1552 mm
1312/1482/1652 mm
–
1721/1891 mm
1114/1284 mm
1280/1450/1620 mm
–
1434/1604 mm
1556/1726 mm
1600/1770 mm
1722/1892 mm
1308/1478/1648 mm
1605/1705/1775 mm
–
–
1199/1369/1539 mm
1288/1458/1628 mm
–
–
1311/1481/1651 mm
1608/1778 mm
–

Ingenious thinking: one walk-behind tractor
that can be used in all kinds of ways
Rapid Euro with snow thrower providing
winter services
Rapid Euro with snowplough providing
winter services
Rapid Euro with stone burier being used
in horticulture
Rapid Euro with rotary harrow being used to
prepare a seed bed
Universal walk-behind
tractors can be used for
multiple purposes. This
makes them cheaper to buy and run
than if you had lots of separate
single-purpose machines. It also means
that less storage space is required.
Because the operator can use the same
basic machine throughout all the
seasons, they get to know it inside out,
which results in higher levels of safety
and efficiency.
Rapid Euro with Flail Mower performing mulching
Rapid Euro with zero grazer being used for
forage harvesting

Rapid EURO
Attachments
WALK-BEHIND TRACTOR MODEL
EURO
Attachment name
Features
Snowplough 100, 125, 150 cm Sprung, can be laterally swivelled from the handlebar •
Combi-Snowplough 125 cm Single-sided and V-shaped plough •
Snow thrower 87, 105 cm Ejection chamber and gate adjustable from the handlebar •
Middle cut sickle bar 130, 145, 160, 190, 220 cm Finger spacing 2"/50.8 mm, with outer shoe •
Middle cut sickle bar 130, 145, 160, 190, 220, 250 cm Finger spacing 2"/50.8 mm, with side cutters •
Normal cut sickle bar 130, 145, 160, 190, 220 cm Finger spacing 3"/76,2 mm, with outer shoe •
Normal cut sickle bar 130, 145, 160, 190, 220, 250 cm Finger spacing 3"/76,2 mm, with side cutters •
Diamant cut sickle bar 174, 197, 220 cm Finger spacing 58 mm, with outer shoe •
Diamant cut sickle bar 174, 197, 220, 244 cm Finger spacing 58 mm, with side cutters •
Landscaping cutter bar 122, 142, 162 cm No fingers, no clogging, sprung/adjust. hold-down device •
Dual cutter bars 132, 146, 181, 204 cm Bidux system, blade spacing 70/70 mm, does not clog up •
Broad gauge mower 160, 200, 230 cm Bidux dual cutter bar system, does not clog up •
Hayrake 150, 180 cm Total width 210, 240 cm •
Round baler Working width 100 cm, bale diameter 55 cm •
Bale wrapper Incl. roll of foil •
Flail Mower 90, 110, 130 cm Cutter height 20–100 mm, Y blades •
Stone burier 90 cm Lateral drive, tilling depth 14 cm •
Uni-Rotary Harrow 100, 125 cm Adjustable working depth •
Drilling container 44 l For mounting on the 100 cm Uni-Rotary Harrow •
Mulch sickle mower 105 cm Cutter height 40-70 cm, incl. mulching device •
Combi-Sweeper 110 cm Universal brush Ø 42 cm •
Dirt container 110 l For Combi-Sweeper 110 cm •
Side brush Brush Ø 52 cm, for Combi-Sweeper •
Open sweeper 130 cm Universal brush Ø 42 cm •
Leaf vacuum turbine With swivel wheels, continuous height adjustment •
Ancillary vacuum 75 cm Accessory for leaf vacuum turbine •
Blower device Accessory for leaf vacuum turbine •
Vacuum hose 7.5 m Accessory for leaf vacuum turbine •
Sand cleaning appliance Dirt collected in removable container •
Shredder R 300 Roller with 2 blades, wood up to max. Ø 8 cm •
Combi-spreader For sand, salt, grit, etc. •
Mini Cargo Transport trough can be tipped forwards •
Trailer Immobilisation brake, manual tipping device •
Winter services
Mowing/harvesting Mulching Tilling area maintenance
Spraying/spreading
Transport
Your Rapid specialist:
Rapid Technic AG
Industriestrasse 7
CH-8956 Killwangen, Switzerland
T +41 44 743 11 11
www.rapid.ch
Subject to change without
prior notice
RP201’005-2_02/13
Certified management system
ISO 9001