Component/S-Video A/V Selector Switch - Radio Shack
Component/S-Video A/V Selector Switch - Radio Shack
Component/S-Video A/V Selector Switch - Radio Shack
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 Use the <strong>Selector</strong> <strong>Switch</strong><br />
Using the remote control to operate the selector switch<br />
1. Press 1-4 on the remote to view the device connected to<br />
INPUT 1-4.<br />
2. Operate the device as usual.<br />
Manually operating the selector switch<br />
1. Press SELECT on the front panel to view the device<br />
connected to INPUT 1-4, in sequence.<br />
2. Operate the device as usual.<br />
Replacing the Battery in the Remote Control<br />
Your remote comes with a battery installed. Remove the plastic<br />
tab before using the remote. Replace the battery if the remote<br />
control stops operating properly.<br />
1. Press the tab on the battery compartment tray, slide the<br />
battery compartment tray out.<br />
2. Insert a new 3V, CR2025 battery,<br />
positive “+” side up.<br />
3. Slide the tray back into the battery<br />
compartment until it clicks.<br />
b Battery Notes:<br />
• Keep button-cell battery away from children. Swallowing a<br />
button-cell battery can be fatal.<br />
• Dispose of batteries promptly and properly. Do not burn or<br />
bury them.<br />
• Use only fresh batteries of the required size and type.<br />
6
Change language