TEGOLON 12-10 TEGOLON 12-20 - Quetzal Quimica

Guide Line Formulations
High Solid Cream-to-Powder
Foundation CC 1079
Phase A %
TEGOSOFT ® OP (Ethylhexyl Palmitate) 14.60
TEGOSOFT ® CO (Cetyl Ethylhexanoate) 5.00
Phenyl Trimethicone 14.00
Copernicia Cerifera 4.70
ABIL ® Wax 2434 (Stearoxy Dimethicone) 4.00
TEGOSOFT ® SH (Stearyl Heptanoate) 2.85
PVP/Eicosene Copolymer 1.00
Phase B
Methyl Methacrylate Crosspolymer
6.00
(Covabead LH85, Sensient Technologies)
Silica (AEROSIL 200, Degussa / Aerosil & Silanes) 0.25
Zinc Oxide 7.00
Talc, Dimethicone, Trimethylsiloxysilicate 9.50
(Talc Covasil 4.05, Sensient Technologies)
Acrylates Copolymer
2.00
(Polytrap Q5-6603, Amcol Health & Beauty
Solutions)
TEGOLON ® 12-10 or TEGOLON ® 12-20 2.00
Aluminum Starch Octenylsuccinate 9.50
Iron Oxides 3.10
Titanium Dioxide, Dimethicone
14.50
(Titanium Dioxide W.877 3.05, Sensient
Technologies)
Preparation:
1. Melt phase A at 80-82 °C and stir until a clear
phase is obtained.
2. Add Methyl Methacrylate Crosspolymer, stir and
homogenise for at least 10 min.
3. Add the remaining ingredients of phase B one
after the other under stirring.
4. Stir and homogenise for 30 min. at 80-82 °C.
5. Pour into suitable packaging.
O/W Shine Control Face Cream
MK 60/05-3
Phase A %
AXOL ® C 62 (Glyceryl Stearate Citrate) 1.50
TEGO ® Alkanol 1618 (Cetearyl Alcohol) 3.00
TEGIN ® M Pellets (Glyceryl Stearate) 2.00
TEGOSOFT ® DC (Decyl Cocoate) 9.50
TEGOSOFT ® CT (Caprylic/Capric Triglyceride) 9.50
TEGOSOFT ® CR (Cetyl Ricinoleate) 4.00
Ceramide III B (Ceramide 3) 1.00
TEGOLON ® 12-10 2.00
Tocopheryl Acetate 0.50
Phase B
Water 61.00
Glycerin 5.00
Phase C
TEGO ® Carbomer 134 (Carbomer) 0.20
TEGOSOFT ® DC (Decyl Cocoate) 0.80
Phase D
Sodium Hydroxide (10 % in water)
q.s.
Phase Z
Preservative, Parfum
q.s.
Preparation:
1. Heat phase A and B separately to approx. 80 °C.
2. Add phase A to phase B with stirring 1) .
3. Homogenise.
4. Cool with gentle stirring to approx. 60 °C and add
phase C.
5. Homogenise for a short time.
6. Cool with gentle stirring and add phase D below 40
°C.
1) Important: If phase A has to be charged into the
vessel first, phase B must be added without stirring
Page 5 of 6