TEGINACID + H_e - Quetzal Quimica
TEGINACID + H_e - Quetzal Quimica
TEGINACID + H_e - Quetzal Quimica
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
O/W Foaming Lotion<br />
WR 19/01-19<br />
Phase A<br />
<strong>TEGINACID</strong> ® H 3.90 %<br />
TEGO ® Alkanol 18 1.30 %<br />
TEGOSOFT ® P 3.90 %<br />
TEGOSOFT ® DC 3.20 %<br />
TEGOSOFT ® TN 2.50 %<br />
Phase B<br />
Glycerin 1.50 %<br />
Water 48.30 %<br />
Phase C<br />
TEGO ® Betain 810 6.00 %<br />
Water 28.70 %<br />
Phase D<br />
Phenonip<br />
0.70 %<br />
Phenoxyethanol; Methylparaben;<br />
Ethylparaben, Nipa Laboratories<br />
Parfum<br />
q.s.<br />
Preparation:<br />
1. Heat phase A and B separately to approx. 80 °C.<br />
2. Add phase A to phase B with stirring. 1)<br />
3. Homogenise.<br />
4. Cool with gentle stirring to 25 °C.<br />
5. Add phase D to phase C with gentle stirring until it<br />
is clear.<br />
6. Add phase C/D to emulsion with gentle stirring.<br />
1) Important: If phase A has to be charged into the vessel<br />
first, phase B must be added without stirring.<br />
Remark:<br />
The emulsion may separate into layers with time – this<br />
process is easily reversed by shaking before use. This<br />
does not effect the foaming properties of the product.<br />
Sun Protection Spray<br />
Ma 60/00-3<br />
Phase A<br />
ABIL ® Care 85 2.00 %<br />
<strong>TEGINACID</strong> ® H 3.00 %<br />
TEGO ® Alkanol 18 1.00 %<br />
TEGIN ® M 1.00 %<br />
Ethylhexyl Methoxycinnamate 8.00 %<br />
4-Methylenzylidene Camphor 2.00 %<br />
Butyl Methoxydibenzoylmethane 1.00 %<br />
Phase B<br />
Glycerin 2.00 %<br />
EDTA 0.10 %<br />
Water 79.00 %<br />
Phase C<br />
TEGO ® Carbomer 141 0.0375 %<br />
Pemulen TR 1<br />
0.0375 %<br />
Acrylates/C10-30 Alkyl Acrylate<br />
Crosspolymer, BF Goodrich<br />
Xanthan Gum 0.025 %<br />
Mineral Oil (30 mPas) 0.40 %<br />
Phase D<br />
Sodium Hydroxide (10 % in water) 0.40 %<br />
Preservative, Parfum<br />
q.s.<br />
Preparation:<br />
1. Heat phase A and B separately to approx. 80 °C.<br />
2. Add phase A to phase B with stirring. 1)<br />
3. Homogenise.<br />
4. Cool with gentle stirring to approx. 60 °C and add<br />
phase C.<br />
5. Homogenise for a short time.<br />
6. Cool with gentle stirring and add phase D below<br />
40 °C.<br />
1) Important: If phase A has to be charged into the vessel<br />
first, phase B must be added without stirring.<br />
F 07/03<br />
Page 4 of 4