TEGINACID + H_e - Quetzal Quimica
TEGINACID + H_e - Quetzal Quimica
TEGINACID + H_e - Quetzal Quimica
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TEGINACID</strong> ®<br />
<strong>TEGINACID</strong> ® H<br />
Emulsifiers for the formulation of cosmetic O/W emulsions<br />
• Blend of emulsifier and consistency-enhancer for<br />
O/W creams and lotions<br />
• For sprayable and foaming lotions<br />
• Stable emulsions from pH 4.0 up to 8.5<br />
Goldschmidt Personal Care<br />
Page 1 of 4
INCI name (CTFA name)<br />
<strong>TEGINACID</strong> ® Glyceryl Stearate (and) Ceteareth-20<br />
<strong>TEGINACID</strong> ® H Glyceryl Stearate (and) Ceteth-20<br />
Chemical and physical properties<br />
(not part of specifications)<br />
<strong>TEGINACID</strong> ®<br />
<strong>TEGINACID</strong> ® H<br />
Form pellets powder<br />
Colour ivory ivory<br />
HLB value approx. 12 approx. 12<br />
Application<br />
• <strong>TEGINACID</strong> ® is suitable for the formulation<br />
of O/W creams.<br />
• <strong>TEGINACID</strong> ® H is suitable for the<br />
preparation of O/W lotions, especially<br />
sprayable and foaming lotions are also<br />
possible.<br />
• <strong>TEGINACID</strong> ® products are distinguished by<br />
their stability in acid or weakly alkaline<br />
formulations (pH 4.0 up to 8.5).<br />
Preparation<br />
We recommend for the preparation of creams<br />
to heat oil phase and water phase separately to<br />
approx. 65 °C; for lotions and sprays oil phase<br />
and water phase are heated separately to<br />
80 °C.<br />
Furthermore we recommend to add the hot oil<br />
phase to the hot water phase while stirring.<br />
The coarsely dispersed pre-emulsion is then<br />
homogenised.<br />
If the above-mentioned processing is not<br />
possible, we recommend to combine the hot<br />
water and oil phase without stirring (to avoid<br />
the building of the water-in-oil form) and start<br />
afterwards with the homogenisation.<br />
During cooling, a constant horizontal and<br />
vertical movement of the emulsion has to be<br />
ensured. The viscosity of the liquid emulsion<br />
increases to a creamy consistency, as the<br />
hydrated consistency promoters solidify.<br />
Perfume, temperature-sensitive substances or<br />
electrolyte containing ingredients are added at<br />
35 - 45 °C.<br />
The particle size of the dispersed oil droplets<br />
of long-term stable creams is approximately<br />
1 - 4 µm, for lotions and sprays < 1 µm. More<br />
coarsely dispersed emulsions tend to separate.<br />
Recommended usage concentration<br />
<strong>TEGINACID</strong> ® 4.0 – 7.0 %<br />
<strong>TEGINACID</strong> ® H 3.0 – 4.0 %<br />
Packaging<br />
<strong>TEGINACID</strong> ®<br />
<strong>TEGINACID</strong> ® H<br />
600 kg pallet (24 x 25 kg)<br />
360 kg pallet ( 6 x 60 kg)<br />
Page 2 of 4
Hazardous goods classification<br />
Information concerning<br />
−<br />
−<br />
−<br />
−<br />
classification and labelling according to<br />
regulations for transport and for dangerous<br />
substances<br />
protective measures for storage and<br />
handling<br />
measures in accidents and fires<br />
toxicity and ecological effects<br />
is given in our material safety data sheets.<br />
Guide Line Formulations<br />
O/W After Sun Lotion<br />
JM 9/91<br />
Phase A<br />
<strong>TEGINACID</strong> ® H 4.0 %<br />
ABIL ® 350 0.5 %<br />
TEGO ® Alkanol 18 1.8 %<br />
TEGOSOFT ® DO 3.5 %<br />
TEGOSOFT ® CT 3.5 %<br />
TEGOSOFT ® S 1.7 %<br />
Phase B<br />
Propylene Glycol 3.0 %<br />
Water 72.0 %<br />
Phase C<br />
SD Alcohol 39 C 10.0 %<br />
Preservative, Parfum<br />
q.s.<br />
O/W Deodorant Spray<br />
Ze 32/96<br />
Phase A<br />
<strong>TEGINACID</strong> ® H 3.00 %<br />
TEGODEO ® CW 90 2.00 %<br />
TEGOSOFT ® liquid 3.00 %<br />
TEGOSOFT ® CT 3.00 %<br />
TEGO ® Alkanol 18 1.00 %<br />
ABIL ® 350 0.50 %<br />
Phase B<br />
Glycerin 3.00 %<br />
Water 84.35 %<br />
Phase C<br />
Citric Acid (50 %) 0.15 %<br />
Preservative, Parfum<br />
q.s.<br />
Sprayable O/W Lotion<br />
JM 3/94<br />
Phase A<br />
<strong>TEGINACID</strong> ® H 6.0 %<br />
TEGO ® Alkanol 18 2.0 %<br />
ABIL ® 350 0.5 %<br />
TEGOSOFT ® CT 5.5 %<br />
TEGOSOFT ® liquid 3.0 %<br />
TEGOSOFT ® S 3.0 %<br />
TEGOSOFT ® DO 5.0 %<br />
Phase B<br />
Glycerin 3.0 %<br />
Water 72.0 %<br />
Preservative, Parfum<br />
q.s.<br />
Page 3 of 4
O/W Foaming Lotion<br />
WR 19/01-19<br />
Phase A<br />
<strong>TEGINACID</strong> ® H 3.90 %<br />
TEGO ® Alkanol 18 1.30 %<br />
TEGOSOFT ® P 3.90 %<br />
TEGOSOFT ® DC 3.20 %<br />
TEGOSOFT ® TN 2.50 %<br />
Phase B<br />
Glycerin 1.50 %<br />
Water 48.30 %<br />
Phase C<br />
TEGO ® Betain 810 6.00 %<br />
Water 28.70 %<br />
Phase D<br />
Phenonip<br />
0.70 %<br />
Phenoxyethanol; Methylparaben;<br />
Ethylparaben, Nipa Laboratories<br />
Parfum<br />
q.s.<br />
Preparation:<br />
1. Heat phase A and B separately to approx. 80 °C.<br />
2. Add phase A to phase B with stirring. 1)<br />
3. Homogenise.<br />
4. Cool with gentle stirring to 25 °C.<br />
5. Add phase D to phase C with gentle stirring until it<br />
is clear.<br />
6. Add phase C/D to emulsion with gentle stirring.<br />
1) Important: If phase A has to be charged into the vessel<br />
first, phase B must be added without stirring.<br />
Remark:<br />
The emulsion may separate into layers with time – this<br />
process is easily reversed by shaking before use. This<br />
does not effect the foaming properties of the product.<br />
Sun Protection Spray<br />
Ma 60/00-3<br />
Phase A<br />
ABIL ® Care 85 2.00 %<br />
<strong>TEGINACID</strong> ® H 3.00 %<br />
TEGO ® Alkanol 18 1.00 %<br />
TEGIN ® M 1.00 %<br />
Ethylhexyl Methoxycinnamate 8.00 %<br />
4-Methylenzylidene Camphor 2.00 %<br />
Butyl Methoxydibenzoylmethane 1.00 %<br />
Phase B<br />
Glycerin 2.00 %<br />
EDTA 0.10 %<br />
Water 79.00 %<br />
Phase C<br />
TEGO ® Carbomer 141 0.0375 %<br />
Pemulen TR 1<br />
0.0375 %<br />
Acrylates/C10-30 Alkyl Acrylate<br />
Crosspolymer, BF Goodrich<br />
Xanthan Gum 0.025 %<br />
Mineral Oil (30 mPas) 0.40 %<br />
Phase D<br />
Sodium Hydroxide (10 % in water) 0.40 %<br />
Preservative, Parfum<br />
q.s.<br />
Preparation:<br />
1. Heat phase A and B separately to approx. 80 °C.<br />
2. Add phase A to phase B with stirring. 1)<br />
3. Homogenise.<br />
4. Cool with gentle stirring to approx. 60 °C and add<br />
phase C.<br />
5. Homogenise for a short time.<br />
6. Cool with gentle stirring and add phase D below<br />
40 °C.<br />
1) Important: If phase A has to be charged into the vessel<br />
first, phase B must be added without stirring.<br />
F 07/03<br />
Page 4 of 4