Q CELLS - Installation manual G3 solar modules - Hanwha Q CELLS
Q CELLS - Installation manual G3 solar modules - Hanwha Q CELLS
Q CELLS - Installation manual G3 solar modules - Hanwha Q CELLS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 INSTALLATION<br />
3.3 Module installation<br />
Option 1:<br />
ÄÄFasten the module with 4 clamps in the<br />
specified clamping area, see Fig. 3, p.<br />
8.<br />
ÄÄTighten clamps to a torque of 18 Nm.<br />
ÄÄMaintain an interval of at least 10 mm<br />
between two <strong>modules</strong>.<br />
10mm<br />
10mm<br />
Option 2:<br />
ÄÄInstall the module at the 4 mounting<br />
points, see Fig. 3, p. 8.<br />
NOTE! Module damage may occur!<br />
ÄÄDo not subject <strong>modules</strong> to mechanical<br />
tension. Max. torsion 10 mm/m.<br />
Option 3:<br />
ÄÄInstall the module using mounting<br />
profiles, Fig. 3, p. 8.<br />
14 INSTALLATION AND OPERATION MANUAL SOLAR MODULES GENERATION 3 (<strong>G3</strong>) – HANWHA Q <strong>CELLS</strong> GMBH – EN