Q.PEAK-G2 250-265 Maximum power and appearance ... - Q-Cells

MONOCRYSTALLINE SOLAR MODULE
Q.PEAK-G2 250-265
Maximum power and appearance
The monocrystalline Q.PEAK-G2 solar module is the perfect combination of power and appearance:
black cells and a black frame with power classes up to 265 W – a world record for black modules. But
be careful: Not all solar modules are the same. Only Q.CELLS offers German engineering quality with
our unique triple Yield Security.
YOUR EXCLUSIVE TRIPLE YIELD SECURITY
power loss resulting from unwanted leakage
currents (potential-induced degradation) 1 .
is the ‚Finger
Print‘ of a solar cell. Tra.Q TM ensures contin-
production process from cells to modules
while making Q.CELLS solar modules
ONE MORE ADVANTAGE FOR YOU
The actual output
of all Q.CELLS solar modules is up to 5 Wp
higher than the nominal power thanks to
positive sorting.
Q.CELLS tests its solar
modules in the world‘s largest module
prescribed in the standards.
Q.CELLS offers
the best warranties on the market.
2 .
1 APT test conditions:
2 For further information please see page 2 of this data sheet.

MECHANICAL SPECIFICATION
Format
Weight
150
1670
980
Front Cover
6 x Grounding points ø 4.5
Back Cover
Frame
Black anodised aluminum
Product label
Frame
Cell
Junction box
Junction box
1210
Cable with
connectors
1000
Cable
4 mm² Solar cable; (+) 1210 mm, (-) 1210 mm
Connector
4 x Fastening points, long slot 8 x 16 8 x Drainage holes
ELECTRICAL CHARACTERISTICS
PERFORMANCE AT STANDARD TEST CONDITIONS (STC: 1000 W/m 2 1
NOMINAL POWER (+5/-0 W) [W] 250 255 260 265
Average Power P MPP [W] 252.5
Short Circuit Current I SC [A] 9.12 9.23
Open Circuit Voltage V OC [V]
Current at P MPP
I MPP [A]
Voltage at P MPP
V MPP [V] 30.01 30.31
[%] 15.0 15.3 15.9
PERFORMANCE AT NORMAL OPERATING CELL TEMPERATURE (NOCT: 800 W/m 2 2
NOMINAL POWER (+5/-0 W) [W] 250 255 260 265
Average Power P MPP [W] 195.25
Short Circuit Current I SC [A]
Open Circuit Voltage V OC [V] 34.11
Current at P MPP
I MPP [A]
Voltage at P MPP
V MPP [V]
1
Measurement tolerances STC: ± 3 % (P MPP
); ± 10 % (I SC
, V OC
, I MPP
, V MPP
)
2
Measurement tolerances NOCT: ± 5 % (P MPP
); ± 10 % (I SC
, V OC
, I MPP
, V MPP
)
Q.CELLS PERFORMANCE WARRANTY
PERFORMANCE AT LOW IRRADIANCE
EFFICIENCY RELATIVE TO
NOMINAL POWER [%]
100
97
95
90
85
80
75
0 5 10 15 20 25
YEARS
TEMPERATURE COEFFICIENTS (AT 1000 W / m 2 , 25 °C, AM 1.5 G SPECTRUM)
SC [% / K] + 0.04 OC [%/ K]
MPP [% / K]
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V SYS [V] 1000 Safety Class II
Maximum Reverse Current I R [A] 20 Fire Rating C
Wind / Snow Load
(in accordance with IEC 61215)
Q.CELLS
Best competitor
Industry standard
QUALIFICATIONS AND CERTIFICATES
All data within measurement tolerances.
RELATIVE EFFICIENCY [%]
[Pa] 5400 Permitted module temperature on continous duty
PARTNER
105
100
95
90
85
80
100 200 300 400 500 600 700 800 900 1000
IRRADIANCE [W/m 2 ]
Specifications subject to technical changes © Hanwha Q.CELLS GmbH
NOTE: Installation instructions must be followed. See the installation and operating manual or contact the technical service for further information on approved installation and use of this product.
HANWHA Q.CELLS GMBH
OT Thalheim, Sonnenallee 1–21
d-
TEL +49 9-23444
FAX +49 9-23000
EMAIL sales@q-cells.com
WEB www.q-cells.com