ANTIL® 200 ANTIL® 200

ANTIL® 200
Very efficient, liquid thickening agent for shampoos, shower and bath preparations
• highly effective
• pleasant rheological behaviour of final products
• may be incorporated directly in any stage of the
production process
• easy to handle (liquid, pumpable)
• vegetable based
• nitrogen-free
Personal Care

INCI Name (CTFA Name)
PEG-200-Hydrogenated Glyceryl Palmate;
PEG-7 Glyceryl Cocoate
Chemical and physical properties
Form
Properties
liquid
The very good thickening properties combined with
easy handling make ANTIL ® 200 to a universal
thickening agent. A pleasant refatting effect can be
achieved by using ANTIL ® 200. Cosmetic
formulations, which are thickened by ANTIL ® 200,
show a nearly ideal viscous rheology. Whereas in
comparison systems thickened with Cocamide DEA,
Laureth-3 or NaCl, exhibit a strong shear thinning
flow behaviour.
While ANTIL ® 200 is a surface active agent, it is a
good solubilizer for perfumes or ester oils, too.
High levels of perfume or ester oils may be
solubilized without turbidity.
Due to the solubility/disperseability in water, ANTIL ®
200 can be added at any phase of the production
process, even into the final formulation as long as
the surfactant solids are greater than 5 %. Due to the
low viscosity and good solubility of ANTIL ® 200,
specialized process equipment is not necessary.
The high efficiency of ANTIL ® 200 is shown in Fig. 1.
The length of the bars show the quantity of ANTIL ®
200 which is necessary to get a viscosity of approx.
3 500 mPas.
The following surfactant solutions were tested:
Anionic
surfactant
Cosurfactant 1
Cosurfactant 2
11.25 % active
matter
3.75 % active
matter
7.5 % active
matter
3.75 % active
matter
3.75 % active
matter
ANTIL ® 200 x % x %
NaCl 0/0.5 % 0/0.5 %
Water ad 100.0 % ad 100.0 %
NaLES/SLESSuc/Glyc 818
alpha-OS/Bet F 50
SLES/Gluc 1216
SLES/SCIS/Bet F 50
SLES/Bet F 50
ANTIL 200 0,5 % NaCl
ANTIL 200 without NaCl
0 1 2 3 4 5 6 7
concentration ANTIL® 200 [%]
Fig. 1. Concentration of ANTIL ® 200 necessary to obtain a viscosity of approx. 3 500 mPas.
NaLES = Sodium Laureth Sulfate; SLESSuc = REWOPOL ® SB FA 30 B; Glyc 818 = REWOTERIC ® AM C,
alpha-OS = Alpha-Olefinsulfonat; Bet F 50= TEGO ® Betain F 50; Gluc 1216 = Lauryl Glucoside;
SCIS = Sodium Cocoyl Isethionate

Application
ANTIL ® 200 is suitable for thickening of all common
surfactant systems such as
• Shampoos
• Shower gels
• Foam baths
Processing
ANTIL ® 200 is processable at room temperature. Its
viscosity makes it feasable for use in a continuous
production. If ANTIL ® 200 shows partial
crystallisation due to low storage temperatures, heat
to app. 40 °C and mix until uniform before using.
Packaging
880 kg pallet (4 x 220 kg drum)
Storage hint
Clouding due to cold temperatures is possible.
In case of separation, ANTIL ® 200 has to be
homogenized before processing.
Hazardous goods classification
Information concerning
• classification and labelling according to
regulations for transport and for dangerous
substances
• protective measures for storage and handling
• measures in accidents and fires
• toxicity and ecological effects
is given in our material safety data sheets.
Guide Line Formulations
Conditioning shampoo
UM 262/1/5
[%]
Sodium Laureth Sulfate (28 %) 32.0
Perfume 0.5
ABIL ® EM 90
(Cetyl Dimethicone Copolyol)
0.5
Water ad 100.0
ABIL ® Quat 3272
(Quaternium-80)
ABIL ® B 88183
(Dimethicone Copolyol)
REWOTERIC ® AM C
(Sodium Cocoamphoacetate)
0.5
1.5
13.0
Citric Acid (30 %) 2.7
ANTIL ® 200 1.5
Sodium Chloride
Preservatives
q.s.
q.s.
Babyshampoo
UM 262/3/2
TAGAT ® CH 40
(PEG-40 Hydrogenated Castor Oil)
TEGOSOFT ® GC
(PEG-7 Glyceryl Cocoate)
[%]
2.0
1.5
Sodium Laureth Sulfate (28 %) 10.0
Lauryl Glucoside (50 %) 7.0
Perfume 0.3
Water ad 100.0
TEGO ® Betain F 50
(Cocamidopropyl Betaine)
TEGO ® Betain 810
(Capryl/Capramidopropyl Betaine)
7.0
3.0
ANTIL ® 200 2.5
Sodium Chloride
Preservatives
q.s.
q.s.
Preparation:
Mix the ingredients in the given order. In all formulations the final adjustment of the viscosity can
be done with NaCl.

Mild Shower gel
UM 262/2/4
[%]
Sodium Laureth Sulfate (28%) 30.0
REWOPOL ® SB FA 30 B
(Sodium Laureth Sulfosuccinate)
5.0
Perfume 0.5
TEGOSOFT ® M
(Isopropyl Myristate)
TEGOSOFT ® PC 41
(Polyglyceryl-4 Caprate)
0.5
1.0
Water ad 100.0
TEGO ® Betain F 50
(Cocamidopropyl Betaine)
LACTIL ®
(Sodium Lactate; Sodium PCA; Glycine;
Fructose; Urea; Niacinamide; Inositol;
Sodium Benzoate; Lactic Acid)
12.0
1.0
ANTIL ® 200 1.0
Sodium Chloride
Preservatives
q.s.
q.s.
Clear Shower
S
gel
without anionic surfactants
UM 262/4/4
TEGOSOFT ® LSE 65 K
(Sucrose Cocoate)
TEGOSOFT ® GC
(PEG-7 Glyceryl Cocoate)
[%]
2.0
2.0
Lauryl Glucoside (50 %) 12.5
Perfume 0.5
TEGO ® Betain F 50
(Cocamidopropyl Betaine)
REWOTERIC ® AM C
(Sodium Cocoamphoacetate)
12.5
11.0
Citric Acid (30 %) 2.2
Water ad 100.0
TEGO ® Betain 810
(Capryl/Capramidopropyl Betaine)
4.0
ANTIL ® 200 3.0
Sodium Chloride
Preservatives
q.s.
q.s.
Preparation:
Mix the ingredients in the given order. In all formulations the final adjustment of the viscosity can
be done with NaCl.
F 05/08