PRODUCT CATALOGUE - Pronar

More documents

Recommendations

Info

WINDROWERS ZKP420 ZKP350 ZKP300 PRONAR ZKP300 Working width 3,0 m Type of mounting attachment Rigid cat. I and II Number of working arms 8 Number of raking fingers on one arm 3 PTO revolutions 540 RPM Min. Tractor power 15kW/20HP Weight 285 kg PRONAR ZKP350 Working width 3,5 m Type of mounting attachment Rigid cat. I and II Number of working arms 9 Number of raking fingers 3 on one arm PTO revolutions 540 URPM Min. Tractor power 19kW/25HP Weight 315 kg PRONAR ZKP420 Working width 4,2 m Type of mounting attachment Rigid cat. I and II Number of working arms 11 Number of raking fingers 4 on one arm PTO revolutions 540 RPM Min. Tractor power 22kW/30HP Weight 500 kg The ZKP300 in a single carousel windrower with a working width of 3 m, equipped with eight working arms. On each arm are three double raking fingers. The axle system is equipped with two wheels with pneumatic tyres. The windrower power requirement amounts to 15 kW (20 KM), and its weight - 285 kg. Machines for harvesting green fodder and dispensing feed 6 The ZKP350 in a single carousel windrower with a working width of 3.5 m, equipped with nine working arms. On each arm of three double raking fingers; the axle system is equipped with two wheels with pneumatic tyres. Power requirement of the ZKP350 windrower amounts to 19kW (25 KM), and weight - 315 kg. The ZKP420 is a single carousel windrower, with a working width of 4.2m, equipped with eleven working arms possessing on each arm four double raking fingers. The elastic suspension of the ZKP420 windrower, due to mobile heads, improves manoeuvrability and surface tracking, and two shock absorbers improve working conditions and assist the central setting of machine behind tractor. The axle system is equipped with wheels with pneumatic tyres in tandem arrangement. The ZKP420 windrower power requirement amounts to 22 kW (30 KM), and its weight - 500 kg.
Z245 BALE WRAPPER PRONAR Z245 Length 5590 Width 2520 Height 2560 Weight 2070 Maximum bale diameter to 1800 Maximum bale width to 1500 Permissible bale weight 1100 Plastic foil roll width 500 / 700 Loading arms hydraulic operation Recall mechanism hydraulic operation foil grabbing mechanism hydraulic operation Cutting foil hydraulic operation The Z-245 is a self loading bale wrapper not requiring the services of other machines, such as foreloaders or loaders. The Z-245’s modern design assures rapid and easy work. It is designed for the wrapping of bales with a maximum diameter 1.8 m, and width to 1.5 m and weight to 1100 kg. The operation of the wrapper is enabled by use of the tractor external hydraulics. Control of wrapper operation is with the aid of hydraulic transfer distributor, which may be placed in tractor cab. Wrapper loading arms are powered by hydraulic motor (hydraulic ram), bales are transported directly onto rotating table, whether they are wrapped in foil. For bale wrapping, foil of widths 500 and 750 mm may be used. Foil dispenser is mounted on frame, whereas the wrapping counter is installed in the tractor cab. Machines for harvesting green fodder and dispensing feed 7
Page 1: PRODUCT CATALOGUE Machines for harv
Page 4 and 5: MOWERS REAR PRONAR PDK 210 Cutting
Page 8 and 9: BALER PRONAR Z500 Header pick up wi
Page 10 and 11: BALE TRANSPORT TRAILERS PRONAR TO22
Page 12: www.pronar.pl Projekt współfinans

PRODUCT CATALOGUE - Pronar

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?