PRODUCT CATALOGUE - Pronar

PRODUCT CATALOGUE
Machines for harvesting green fodder and dispensing feed

TABLE OF CONTENTS
4
5
6
7
8
9
10
11
MOWERS
TEDDERS
WINDROWERS
BALE WRAPPERS
BALERS
FEEDER WAGONS
BALE TRANSPORTER PLATFORMS
FRONTLOADERS

MOWERS
REAR
PRONAR PDK 210
Cutting width [m] 2,1
Swath width min./ max
[m]
1,5
Productivity [ha/h] 2,1
Number of discs 5
Number of knives 10
Min. tractor power [kW/
HP]
22/30
PTO revolutions [RPM] 540
Weight [kg] 380
PRONAR PDT 250
Cutting width [m] 2,5
Swath width min./ max 1,1/1,6
[m]
Productivity [ha/h] 2,5
Number of discs 6
Number of knives 12
Min. tractor power [kW/ 37/50
HP]
PTO revolutions [RPM] 540
Weight [kg] 520
PRONAR PDT 290
Cutting width [m] 2,9
Swath width min./ max 1,55/1,95
[m]
Productivity [ha/h] 3
Number of discs 7
Number of knives 14
Min. tractor power [kW/ 44/60
HP]
PTO revolutions [RPM] 540
Weight [kg] 550
PDD 810
REAR TWO SIDED
PDK 210 PDT 250 PDT 290
REAR REAR
PDF 290
FRONT
PRONAR PDF 290
Cutting width [m] 2,9
Swath width min./ max 1,55/1,95
[m]
Productivity [ha/h] 3,0
Number of discs 7
Number of knives 14
Min. tractor power [kW/ 44/60
HP]
PTO revolutions [RPM] 540
Weight [kg] 610
PDD 810
REAR TWO SIDED
PRONAR PDD 810
Cutting width [m] 8,1*
Swath width min./ max 2x1,55/2x1,95
[m]
Productivity [ha/h] 10,0*
Number of discs
2x7
Number of knives 2x14
Min. tractor power [kW/ 81/110*
HP]
PTO revolutions [RPM] 1000
Weight [kg] 1110
*) for matching with mower PDF290
Choice of the appropriate mower, its correct setting
and matching with the appropriate tractor has
a decisive effect on the quality and economy of mowing.
A modern mower should ensure good ground
surface tracking (correct mower setting in relation to
mown surface), clean and aesthetic cut, correct cutting
height and appropriate productivity. These factors
have a significant influence on the quality of the
fodder produced on the farm.
Modern technical solutions, applied in Pronar mowers,
fulfil the above criteria and work with them is
easier. Pronar mowers have been designed and implemented
into production by a team of the best
construction designers of this product group in Poland.
Machines 4
for harvesting green
fodder and dispensing feed
High-quality gearing and cutting strip are applied in
the Pronar mower drives. These strips and gearings
are also used by the greatest manufacturers of agricultural
machines in the world.

PWP 770 PWP 350
TEDDERS
PRONAR PWP 770
Working width
7,7 m
Type of mounting attachment
cat. I and II
Number of rotors 6
Number of working arms
7
on rotor
Min. Tractor power 37kW / 50HP
PTO revolutions
540 RPM
Weight
915 kg
PRONAR PWP 530
Working width
5,3 m
Type of mounting attachment
cat. I and II
Number of rotors 4
Number of working arms
7
on rotor
Min. Tractor power 22kW/30HP
PTO revolutions
540 RPM
Weight
685 kg
Setting the working angle of the machine takes place by use
of the lever centrally mounted in the machine body.
Machines for harvesting green
fodder and dispensing feed
5

WINDROWERS
ZKP420
ZKP350
ZKP300
PRONAR
ZKP300
Working width
3,0 m
Type of mounting attachment
Rigid cat. I and II
Number of working arms 8
Number of raking fingers
on one arm
3
PTO revolutions
540 RPM
Min. Tractor power 15kW/20HP
Weight
285 kg
PRONAR
ZKP350
Working width
3,5 m
Type of mounting attachment
Rigid cat. I and II
Number of working arms 9
Number of raking fingers 3
on one arm
PTO revolutions
540 URPM
Min. Tractor power 19kW/25HP
Weight
315 kg
PRONAR
ZKP420
Working width
4,2 m
Type of mounting attachment
Rigid cat. I and II
Number of working arms 11
Number of raking fingers 4
on one arm
PTO revolutions
540 RPM
Min. Tractor power 22kW/30HP
Weight
500 kg
The ZKP300 in a single carousel windrower with a working
width of 3 m, equipped with eight working arms. On each
arm are three double raking fingers. The axle system is equipped
with two wheels with pneumatic tyres. The windrower power
requirement amounts to 15 kW (20 KM), and its weight - 285
kg.
Machines for harvesting green
fodder and dispensing feed
6
The ZKP350 in a single carousel windrower with a working
width of 3.5 m, equipped with nine working arms. On each
arm of three double raking fingers; the axle system is equipped
with two wheels with pneumatic tyres. Power requirement of the
ZKP350 windrower amounts to 19kW (25 KM), and weight - 315
kg.
The ZKP420 is a single carousel windrower, with a working
width of 4.2m, equipped with eleven working arms possessing
on each arm four double raking fingers. The elastic suspension
of the ZKP420 windrower, due to mobile heads, improves
manoeuvrability and surface tracking, and two shock absorbers
improve working conditions and assist the central setting of machine
behind tractor. The axle system is equipped with wheels
with pneumatic tyres in tandem arrangement. The ZKP420 windrower
power requirement amounts to 22 kW (30 KM), and its
weight - 500 kg.

Z245
BALE WRAPPER
PRONAR
Z245
Length 5590
Width 2520
Height 2560
Weight 2070
Maximum bale diameter to 1800
Maximum bale width to 1500
Permissible bale weight 1100
Plastic foil roll width 500 / 700
Loading arms
hydraulic operation
Recall mechanism
hydraulic operation
foil grabbing mechanism hydraulic operation
Cutting foil
hydraulic operation
The Z-245 is a self loading bale wrapper not requiring the
services of other machines, such as foreloaders or loaders.
The Z-245’s modern design assures rapid and easy work.
It is designed for the wrapping of bales with a maximum
diameter 1.8 m, and width to 1.5 m and weight to 1100
kg. The operation of the wrapper is enabled by use of the
tractor external hydraulics.
Control of wrapper operation is with the aid of hydraulic
transfer distributor, which may be placed in tractor cab.
Wrapper loading arms are powered by hydraulic motor (hydraulic
ram), bales are transported directly onto rotating
table, whether they are wrapped in foil.
For bale wrapping, foil of widths 500 and 750 mm may
be used. Foil dispenser is mounted on frame, whereas the
wrapping counter is installed in the tractor cab.
Machines for harvesting green
fodder and dispensing feed
7

BALER
PRONAR
Z500
Header pick up width (m) 1.8
Chamber type
solid chamber, chain
Chamber diameter (m) 1.2
Chamber width (m) 1.2
Chamber interlock
hydraulic-mechanical
Power requirement (kW/KM) 40/55
String binder
double
Binding density regulation
triple step mechanical
Engaging binder
hydraulically
Operation of chamber and pick up header
From control pulpit placed in tractor
Bale counter
on control panel
Tyres
400/60-15.5 TL 14PR
Height/Length/Width (mm) 2220 / 3490 / 2460
Weight (kg) 2250
OPTIONAL
Net binder
Audio-visual chamber filling signalling
Z500
The Pronar Z500 round baler bales cut grass and straw. It is
a solid chamber chain baler with pickup header with working
width of 1800 mm. Double string binder (accelerates binding
process, and thus baling) comes as a standard and also
operation from tractor cab, mechanical rear flap interlock,
bale ejector enabling commencement of gathering before
closure of rear flap and broad tyres 400/60-15.5 TL 14PR
140.A8 (perform well on marshy meadows).
Machines 8
for harvesting green
fodder and dispensing feed
String binder is equipped with triple step regulation of
binding density, enabling optimal selection of number of
bindings, ensuring optimal selection of bindings number,
depending on the type and size of harvested material, application
of elastomer springs in rear flap bolting system
mechanism guarantees high density of bale, which is important,
with regard to the final quality of the silage. For
an extra payment the following equipment may be ordered
for the baler:
• net binder, significantly accelerates harvesting;
• automatic baler chains greasing, guaranteeing cyclic lubrication
of chains, which extends working life and fault-free operation:
• central lubrication with permanent grease, ensures that all
lubrication points are properly lubricated;
• Audio-visual chamber filling signalling

VMP10
PRONAR
FEEDER WAGONS
VMP10
Box capacity with setting (m3) 10
4-point weighing system LCD display
Hitching
Universal execution with adjustable
hitch
Tare weight (kg) 3700
Carrying capacity (kg) 4000
Gross weight (kg) 7700
Total length [mm] 7700
Total width [mm] 2550
Total height [mm] 2600
Length (mm) 1960 / 3470
Width (mm) 2000 / 2440
Height without upper extension (mm) 1590
Height of upper extension (mm) 250
Thickness of container casing, thickness of upper 8
extension (mm)
Thickness of container floor (mm) 20
Mixer
auger, vertical with 9 replaceable
knives
Knives
replaceable, made from chrome vanadium
steel, set in 3 positions
2 counter knives mechanical control
2 chutes folded out automatically
Platform
with steps on both sides of wagon
PTO drive (RPM) 540
Tractor power demand (kW) 45
Number of auger revolutions (RPM) 25
Tyres
30x11.5-14.5 26PR
Maximum speed (km/h) 30
Brake system
pneumatic, single conduit
OPTIONAL EQUIPMENT
Brake system
Pneumatic, double conduit
Brake system
hydraulic
Brake system
overrunning brake
2 counter knives hydraulic operation
2 rubber chute window side shields
Hitching
hitch with rotating drawbar eye
Pronar feeder wagons perform well and equally on smaller as on larger
stock rearing farms. Application of the feeder wagon is increases appetite
in cattle, the feed is mixed better and, in turn, the milk production
of cows is increased. Pronar feeder wagons are typified by solid and
stable construction. The sides are made of steel of thickness 8 mm, and
the container floor of thickness 20 mm.
The auger mixer applied in Pronar feeder wagons is equipped with nine
cutting knives (with optional regulation in three positions). On both
sides of the container at diagonal setting are two mechanically controlled
counter knives, and at the sides are mounted hydraulically opening
chute shafts, for dispensing feed.
The wagon is equipped with 4-point weighing system with LCD display.
Facilitates preparation work and feed dosing. Wagon drive is taken from
tractor PTO, and power demand amounts to approx. 45 kW.
The Pronar foreloader may be used for loading feeder wagon, grabs
for bales and hay and silage cutters, also produced by Pronar, of width
1.25 or 1.5m.
Machines for harvesting green
fodder and dispensing feed
9

BALE TRANSPORT TRAILERS
PRONAR
TO22
Carrying capacity (kg) 7300
Tare weight (kg) 2640
Platform length [mm] 6500
Length of 7100/7600
load surface [mm]
Platform width [mm] 2450
Height of sides [mm] 1640
Height of floor from ground 1100
(mm)
Length (mm) 9070/9570
Width (mm) 2500
Height (mm) 2750
Axles 70
Tyre dimensions
400/60-15.5 14PR
or 14.0/65-16
14PR
PRONAR
TO23
Carrying capacity (kg) 10300
Tare weight (kg) 3680
Platform length [mm] 9700
Length of 10310/11170
load surface [mm]
Platform width [mm] 2450
Height of sides [mm] 1640
Height of floor from ground
1100
(mm)
Length (mm) 12275/13135
Width (mm) 2500
Height (mm) 2750
Axles 70
Tyre dimensions 14.0/65-16
400/60-
15.5
PRONAR
Tare weight
Carrying capacity:
Gross weight
Platform length
Platform width
Length of load surface
(adjustable)
Height of side walls [mm]
Height of floor from ground
Height of floor from ground
Total width
Total height
TO25
2960 kg
9040 kg
12000 kg
6500 mm
2450 mm
7610 mm -
8140 mm
1700 mm
1180 mm
9140 mm-
9670 mm
(adjustable)
2520 mm
2820 mm
Tyres 500/50-17
14PR
TO26 TO25 TO24 TO23 TO22
PRONAR TO26 PRONAR TO24
Tare weight
4210 kg
Carrying capacity: 13790 kg
Gross weight 18000 kg
Platform length 9700 mm
Platform width 2450 mm
Length of load surface
(adjustable)
10470 mm - 11640
mm
Height of side walls 1700mm
[mm]
Height of floor from 1180 mm
ground
Height of floor from 12000 mm-13170
ground
mm (adjustable) 12000 mm-13170 mm
(regulierbar)
Total width
2520 mm
Total height
2880 (at total length
12000) -2820 mm
Tyres
500/50-17 14PR
Tare weight
3100 kg
Carrying capacity: 8900 kg
Gross weight
18000 kg
Platform length
7180 mm
Platform width
2450 mm
Length of load surface (adjustable)
7525 mm
Height of side walls [mm] 1640mm
Height of floor from ground 1130 mm
Total width
2500 mm
Total height
2770 mm
Speed
40 km/h
Platform trailers perform excellently when
transporting straw or hay/silage bales It
is possible to load three layers of bales.
Applying wide tyres facilitates loading on
marshy and peat meadows. With regard
to the maximum speed of these trailers,
which amounts to 40 km/h, platform vehicles
perform excellently in transport of
significant distances.
Two and three axle models are offered,
with suspension springs, with regulated
load surface length - T022 of 7.3t carrying
capacity; T023 of 11.3t. carrying capacity.
Models with increased load capacity are an
innovation - the two axle T025 (9t) and
three axle T026 (14t) - the introduction of
which has a beneficial effect on the number
of hay/silage bales transported, which
weigh more than straw bales.
Machines 10
for harvesting green
fodder and dispensing feed

KL1595 KL1950
LC-2
ŁC-1650 LC-3
FRONT LOADERS
PRONAR LC-3 ŁC-1650 LC-2 KIOTI KL 1950 KL 1595
Lift capacity (kg) 1820 1650 800 Lift capacity (kg) 1100 1300
Maximum lift height (mm) 3480 3850 2960 Maximum height (mm) 2497 2922
Emptying angle at maximum height 63 80 63 Lowest point at maximum lift (mm) 2660 2635
Minimum emptying height (mm) 15 10 15 Highest point at maximum lift (mm) 2140 2079
Working speed (km/h) 6 6 6 Distance from tractor in upper loader position (mm) 230 260
Maximum road speed (km/h) 15 15 15 Emptying angle at maximum height 75 75
Weight (kg) 630 800 330 Distance from front axle in lowered position (mm) 1980 2030
Available for models 5130,5135,5112,51
22,82A,82TSA,82S
A, Zefir85, Zefir 85k,
Kioti751C,Kioti901C,
CNH: TD80D, TD95D
1025A, 1221A, 1523A,
1025AII, 1221AII
BELARUS: 1025, 1221,
1523
Zefir 40 Loader height in lowered position (mm) 1555 1530
What is important in the purchase of a tractor is also important in the purchase of a foreloader: power, productive hydraulic system, visibility, ergonomics and
economy. Ease of operation and servicing is also important, equally for the loader as for the tractor. Pronar foreloaders fulfil these requirements.
Silage cutter Bale and block grab Stump grab Bale grab Loose material bucket 0,6-0,8m 3 Slide shift pallet fork
Machines for harvesting green
fodder and dispensing feed
11

www.pronar.pl
Projekt współfinansowany przez Unię Europejską
w ramach Regionalnego Programu Operacyjnego
Województwa Podlaskiego na lata 2007-2013
FUNDUSZE EUROPEJSKIE - DLA ROZWOJU WOJEWÓDZTWA PODLASKIEGO
Urząd Marszałkowski Województwa Podlaskiego - instytucja Zarządzająca RPOWP
12
Machines
for harvesting green
fodder and dispensing feed