PRODUCT CATALOGUE 35-265 HP tractors - Pronar

EN
P9
8140 [256 hp]
HYDRAULICS
Modern external hydraulics
with oil flow to 116
l/min powered by a pump
with load sensing (LS). It
powers the three-point
linkage system with lift
capacity of 10.5 tonnes
allowing operation of very
heavy machines or implements
e.g. 7-furrow reversible
ploughs.
ENGINE
P9 tractor is powered by -
Deutz engine with Stage
IIIA certification -
(complying with
EU exhaust toxicity level
requirements), six cylinders,
turbocharged, with
intercooler, fuel cooler and
electronically controlled
fuel injection.
TRANSMISSION
Tractor is equipped with
modern ZF transmission,
with internally controlled
electro-hydraulic clutch.
It enables shifting of gears
under load (power shift) in
each of ten four-gear
ranges, with the aid of a
button only. Thus there are
40 forward gears available
and the same number
of reverse gears also
shifted under load (power
shuttle).
CAB
Modern 4-pillar cab with
significantly greater visibility.
Thanks to its advanced
design it meets the
highest European standards.
Air conditioning in
standard and high output
heating system, transparent
roof panel, sunblinds,
Grammer seat and additional
passenger seat. As
an optioned equipment,
hydraulic shock absorption
is available for greater
operator’s comfort.
Engine
Turbocharged DEUTZ
[stage IIIA]
Power HP [kW] 265 [195]
Number of cylinders/Engine cubic capacity (cm 3 ) 6/7146
Number of gears (forward/reverse) 40/40
PTO 540/1000
Rear three-point linkage lift capacity (kg) 10500
Front axle
DANA
Power transmission system
ZF
Oil pump delivery (dm 3 /min) 116
Fuel consumption (g/kWh) 245
Weight (kg) 9930
4
PRODUCT CATALOGUE
35-265 hp tractors