PRODUCT CATALOGUE 35-265 HP tractors - Pronar

PRODUCT CATALOGUE 

35-265 HP tractors

EN 

P9 

8140 [256 hp] 

HYDRAULICS 

Modern external hydraulics 

with oil flow to 116 

l/min powered by a pump 

with load sensing (LS). It 

powers the three-point 

linkage system with lift 

capacity of 10.5 tonnes 

allowing operation of very 

heavy machines or implements 

e.g. 7-furrow reversible 

ploughs. 

ENGINE 

P9 tractor is powered by - 

Deutz engine with Stage 

IIIA certification - 

(complying with 

EU exhaust toxicity level 

requirements), six cylinders, 

turbocharged, with 

intercooler, fuel cooler and 

electronically controlled 

fuel injection. 

TRANSMISSION 

Tractor is equipped with 

modern ZF transmission, 

with internally controlled 

electro-hydraulic clutch. 

It enables shifting of gears 

under load (power shift) in 

each of ten four-gear 

ranges, with the aid of a 

button only. Thus there are 

40 forward gears available 

and the same number 

of reverse gears also 

shifted under load (power 

shuttle). 

CAB 

Modern 4-pillar cab with 

significantly greater visibility. 

Thanks to its advanced 

design it meets the 

highest European standards. 

Air conditioning in 

standard and high output 

heating system, transparent 

roof panel, sunblinds, 

Grammer seat and additional 

passenger seat. As 

an optioned equipment, 

hydraulic shock absorption 

is available for greater 

operator’s comfort. 

Engine 

Turbocharged DEUTZ 

[stage IIIA] 

Power HP [kW] 265 [195] 

Number of cylinders/Engine cubic capacity (cm 3 ) 6/7146 

Number of gears (forward/reverse) 40/40 

PTO 540/1000 

Rear three-point linkage lift capacity (kg) 10500 

Front axle 

DANA 

Power transmission system 

ZF 

Oil pump delivery (dm 3 /min) 116 

Fuel consumption (g/kWh) 245 

Weight (kg) 9930 

4 


35-265 hp tractors

7150 [180 hp] 

P6 

REAR THREE-POINT LINKAGE 

SYSTEM 

P6 tractors are equipped 

with rear three-point linkage 

system which attachment 

dimensions 

correspond to 3rd lift 

category according to 

ELECTROHYDRAULIC CON- 

TROL OF REAR LIFT AND PTO 

SYSTEM 

Operated by the aid of buttons 

raising and lowering 

lower links placed in the 

rear of the mudguards on 

the right and left sides of 

ISO730 standard. Rear the tractor, and also from 

three point linkage system 

enables the attachement 

the control panel to the 

right of the seat. 

of mounted and semi-mounted 

ELECTROHYDRAULIC REtractor. 

implements to the VERSE 

Their action is operated 

Electro-hydraulic reverse 

through the hydraulic is placed at the left side 

system. 

of the steering wheel. One 

finger is enough to move 

the lever e.g. to the rear 

and the tractor stops itself, 

and next begins to reverse. 

This make the operation 

easier and definitely more 

comfortable. 

EHR 

The EHR system enables 

the tractor operator to increase 

speed and concentrate 

on the appropriate 

application on the field, simultaneously 

freeing him 

from the necessity of continous 

observing work - 

ing implements. It enables 

significant acceleration of 

fieldwork and simultaneously 

increases the degree 

of work precision. 

Engine 

Turbocharged DEUTZ 

[stage IIIA] 

Power HP [kW] 180 [129,3] 

Number of cylinders/ Engine cubic capacity (cm 3 ) 6/6057 


PTO 540/750/1000/1400 


Front axle 

DANA 

Power transmission system 

ZF 





35-265 hp tractors 5

EN 

P5 

5135 [100 hp] 

5130 [90 hp] 

POWER TRANSMISSION 

SYSTEM 

P5 series is equipped with 

transmission and front axles 

produced by ZF - the 

leading German transmission 

system producer. 16 

forward and 16 reverse 

gears enable the full use of 

tractor power and work in 

the most optimal conditions 

and the overcoming 

of every difficulty. Clutch 

from the leading producer, 

LUK assures correct 

and faultless operation 

throughout its very long 

working life. 

POWER SHIFT 

The P5 series tractors are 

equipped with modern 

torque amplifier enabling 

change of gears without 

the necessity of using the 

clutch. 

ENGINE 

5135 model is a 97-horsepower 

Perkins unit, while 

5130 is a 100-horsepower 

lveco unit. The engines 

applied are of a totally new 

design, introduced for production 

in the recent years. 

ELECTROHYDRAULIC REAR 

LIFT CONTROL 

at the side of the tractor, 

on the mudguards and in 

the cab the operator has 

buttons to turn on PTO 

and raise and lower the 

lifting arms. Such a solution 

facilitates convenient 

coupling of tractor with 

various machines. 

P5 SERIES TRACTOR may be 

equipped with front threepoint 

linkage sytem 

of 2000 kg, electro-hydraulically 

connected front 

PTO and front-loader with 

lift capacity of 1800 kg. 

PRONAR 5130 5135 5235 

Engine PERKINS stage II IVECO stage II IVECO stage IIIA 

Power HP [kW] 98,6 [72,5] 100 [74] 96,6 [71] 

Number of cylinders/ Engine cubic capacity (cm 3 ) 4/4400 4/4485 4/4485 

Number of gears (forward/reverse) 16/16 16/16 16/16 

PTO 430/540/750/1000 430/540/750/1000 430/540/750/1000 

Rear three-point linkage lift capacity (kg) 4200 4200 4200 

Front axle ZF ZF ZF 

Power transmission system ZF ZF ZF 

Oil pump delivery (dm 3 /min) 58 58 58 

Fuel consumption (g/kWh) 222 217 217 

Weight (kg) 5159 5237 5237 

forward 

backwards 

6 



5112 [82 hp] 

5122 [90 hp] 

P7 

PRONAR 5112 5122 

Engine IVECO stage II IVECO stage II 

Power HP [kW] 82 [60] 90 [66] 

Number of cylinders/Engine cubic capacity (cm 3 ) 4/4485 4/4485 

Number of gears (forward/reverse) 24/24 24/24 

PTO 540/1000 540/1000 

Rear three-point linkage lift capacity (kg) 3000 [3600] 3000 [3600] 

Front axle CARRARO CARRARO 

Power transmission system CARRARO CARRARO 

Oil pump delivery (dm 3 /min) 40 40 

Fuel consumption (g/kWh) 230 217 

Weight (kg) 4040 4055 

forward 

backwards 

LIFT AND HYDRAULICS 

New tractors have very 

high output external hydraulics 

(pump with max 

oil flow 57l/min) delivered 

by two or three (optional) 

pairs of quick coupler. 

Mechanically operted lift 

capacity to 3600 kg. 

Lift is fully adjustable: 

with position, power and 

mixed setting and also release 

speed regulation and 

lift sensitivity. 

P7 may be equipped 

with front three-point linkage 

system of 2000 kg 

electro-hydraulically 

connected front PTO and 

front-loader with lift capacity 

of 1800 kg, increasing 

its functional versatility. 

POWER TRANSMISSION 

SYSTEM 

P7 series tractors are 

equipped with the wellknown 

Carraro transmission 

and front axle. The 

transmission system is 

available in three specifications: 

24/24, synchronised 

24/24 and in specification 

with single step 

torque amplifier (power 

HI-LO). 24 forward and 24 

reverse gears enable full 

use of tractor power and 

work in the most optimal 

conditions. 

ENGINE 

P7 series has two engine 

versions. 80 HP I v e c o 

low intake engine 

and 90 HP I v e c o turbocharged 

unit. Due to 

the large engine capacity 

(4400 cm3), these engines 

have very high maximum 

rotation torque: correspondingly 

320 and 365 

Nm. The torque amplifier 

version enables clutchless 

gear changing. 

CAB 

Excellent cab visibility in 

all directions. All gauges 

are clearly legible and enable 

complete operational 

monitoring. Cab has very 

efficient heating and ventilation 

as standard with 

optional air conditioning. 



EN 

ZEFIR 

ZEFIR 85 [85 hp] 

ZEFIR 85k [85 hp] 

VERSATILE EXTERNAL HY- 

DRAULICS AND PNEUMAT- 

ICS 

46 dm 3 /min oil flow 

available to operator from 

three pairs of rear and one 

pair of front quick couplers 

with front three-point linkage 

lift system guaranteeing 

universal application. 

Single and double line 

pneumatic system enable 

trailer braking equally for 

older and newer versions 

of trailers. 

New Donaldson dry air engine 

inlet filters with filter 

insert blockage indicator. 

ZEFIR 85 bases on simple modern 

design. Equipped with 

proven technology. Despite 

modest price complies 

with high ecological 

standards. 

The modern cab is fitted with 

ergonomic control panels, 

adjustable steering column 

with indicators and upward 

opening side, 

MUNICIPAL VERSION dard equipment) 

• front three point linkage 

system 

(stan- 

• additional pair of front 

quick couplers 

• additional lower beam 

traffic lights 

• additional beaconlight 

• hydraulic distributor with 

one floating position 

MODERN REAR THREE-POINT 

LINKAGE SYSTEM 

Lift control has very userfriendly 

design. Enables ordinary 

lifting and lowering, 

i.e. positioning regulation, 

force regulation setting - 

very important in heavy 

fieldwork condi- 

tions, with risk 

of tractor getting 

mired 

down. 

ZEFIR 85 85k 

Engine 

RICARDO stage II 

technology 

RICARDO stage II 

technology 

Power HP [kW] 84,9 [62,5] 84,9 [62,5] 

Number of cylinders/ Engine cubic capacity (cm3) 4/4750 4/4750 

Number of gears (forward/reverse) 12/4 12/4 

PTO 540/1000 540/1000 

Rear three-point linkage system (kg) 3000 3000 

Front axle FIAT 

FIAT 

Power transmission system FIAT 

FIAT 

Oil pump delivery (dm 3 /min) 46 46 

Fuel consumption (g/kWh) 228 228 

Weight (kg) 4750 4750 

8 



ZEFIR 40 [40 hp] 

ZEFIR 40k MUNICIPAL [40 hp] 

ZEFIR 

ZEFIR 

40 & 40k 

Engine 

stage IIIA 




PTO 540/1000 



Fuel consumption (g/kWh) 258,4 


COMPETITIVE PRICE 

ZEFIR 40 has competitively 

price and distinguished 

by its construction quality 

and excellent operating 

parameters. 

SAFETY AND ECOLOGY 

Pronar understands the 

importance of safety of 

its products and therefore 

complies with all safety 

standards and EU directive 

requirements. ZEFIR 40 

engine has STAGE III 

official certification and 

certification for the cab 

and all the rear linkages, 

not forgetting basic items 

such as safety glass and 

materials with confirmed 

non-flammability. 

MOST ECONOMICAL IN ITS 

CLASS 

Low fuel consumption 

(258g/kWh) and modern 

4 -cylinder diesel engine. 

This is why ZEFIR 40k 

is the ideal tractor for dif - 

ficult urban conditions, 

where the demands of 

municipal machines are 

very high. ZEFIR 40k is a 

tractor with no competition 

in its class! 

COMFORTABLE CAB 

The increasing requirements 

of farmers are reflected 

in the design of 

the cab construction. It is 

equipped with a comfortable 

seat, heating, air filter, 

opening rear and side 

windows. Grammer seat 

and air conditioning available 

as options. 



EN 

320AMK 

320AMK [36 hp] 

QUICK COUPLERS 

The 320AMK is equipped 

with hydraulic quick couplers, 

placed at the rear of 

the tractor. 

UPPER AND LOWER TRANS- 

PORT TOWING HITCHES 

Lower towing hitch designed 

for towing agricultural 

machines and single 

axle trailers and car trailers. 

The upper towing 

hitch is designed for towing 

double axle agricultural 

trailers. 

Excellent visibility on all 

sides, simple positioning 

REAR PTO SHAFT 

of indicators, levers and 

The rear power take-off 

buttons is vital for a municipal 

shaft, seated in the rear 

axle body, enables operation 

tractor, such as the 

320AMK. Due to this trac- 

of agricultural 

tor operation is as simple 

machines requiring power 

supply. PTO rotation speed 

at nominal engine rotation 

speed, with connected dependent 

drive amounts to 

as possible. The 320AMK is 

an irreplaceable tractor in 

all types of municipal work 

in urban areas, livestock 

units, in horticulture and 

540 or 1000 revs/min. 

orchard production and 

SMALL TRACTOR SPACIOUS 

CAB 

also in transport and shipment 

tran- 

handling 

PRONAR 

320AMK 

Engine 

MITSUBISHI stage IIIA 




PTO 540/1000 

Rear three-point linkage system (kg) 750 




10 



LC-2 LC-3 LC-5 LC-1650 KL1950 KL1595 

FRONTLOADERS 

PRONAR LC-2 LC-3 LC-5 LC-1650 KIOTI KL 1950 KL 1595 

Lift capacity (kg) 800 1820 2450 1650 

Lift capacity (kg) 1100 1300 

Maximum lift height (mm) 2960 3480 3860 3850 

Maximum lift height (mm) 2497 2922 

Emptying angle at maximum height 63 63 57 

80 

Lowest point at maximum lift (mm) 2660 2635 

Depth of drop of the lower edge of the bucket (mm) 150 150 150 10 

Highest point at maximum lift (mm) 2140 2079 

Working speed (km/h) 6 6 6 

6 

Distance from tractor in upper loader position (mm) 230 260 

Maximum road speed (km/h) 15 15 15 

15 

Emptying angle at maximum height 75 75 

Loader arms weight (kg) 330 630 550 800 

Distance from front axle in lowered position (mm) 1980 2030 

Mounted on tractors Zefir 40 5130,5135,5112,51 

22,82A,82TSA,82S 

A, Zefir85, Zefir 85k, 

Kioti751C,Kioti901C, 

CNH: TD80D, TD95D 

7150, 6170 1025A, 1221A, 1523A, 

1025AII, 1221AII 

BELARUS: 1025, 1221, 

1523 

Loader height in lowered position (mm) 1555 1530 

What is important in the purchase of a tractor is equally relevant for a loader: power, efficient hydraulic system, visibility, ergonomics and economy. 

Ease of operation and servicing is also important, equally for the loader as for the tractor. 

Pronar front-loaders fulfil these requirements 

cvs 

Silage block cutter 

Square bale 

grapple Log fork Round bale grapple General purpose bucket 



EN 

OPTIONAL EQUIPMENT 

Adapt the tractor to 

your own needs 

All Pronar tractors have numerous 

equipment options 

FRONT-LOADER 

FRONT THREE POINT LINKAGE 

SYSTEM 

FRONT PTO 

AIR CONDITIONING 

GRAMMER SEAT 

BEACON LIGHT 

DARKENED WINDSCREENS 

FRONT WEIGHTS 

HI LO PNEUMATIC SEAT FRONT AXLE SHOCK 

ABSORPTION 

CAB SHOCK ABSORPTION 

Due to client opinion research and experience 

gained in agricultural machine 

production and continual modernisation 

and improvement, we have adapted 

PRONAR tractors to individual client requirements. 

12 





EN 

1 SERIES P9 P6 P5 P7 

2 MODEL 8140 7150 5130 5135 5112 5122 

3 ENGINE DEUTZ DEUTZ PERKINS IVECO IVECO IVECO 

4 Official certification stage IIIA stage IIIA 97/68EC stage II 97/68EC stage II 97/68EC stage II 97/68EC stage II 

5 Power HP [kW] 265 [195] 180 [129,3] 98,6 [72,5] 100 [74] 82 [60] 90 [66] 

6 Nominal engine speed (min-1) 2300 2100 2200 2300 2300 2300 

7 Number of cylinders 6 6 4 4 4 4 

8 Engine cubic capacity 7146 6057 4400 4485 4485 4485 

9 Turbo compressor X X X X — X 

10 Intercooler X X — — — — 

11 Unit fuel consumption (q/kWh) 245 230 222 217 230 217 

12 Maximum torque/revolutions (Nm/min -1 ) 1050/1500 716.6/1600 407/1400 398/1400 320/1400 365/1400 

13 Fuel tank capacity (dm 3 ) 540 370 155 155 130 130 

14 POWER TRANSMISSION SYSTEM ZF (DANA front axle) ZF (DANA front axle) ZF ZF CARRARO CARRARO 

15 Gearbox synchronised synchronised mechanical, synchronised mechanical, synchronised mechanical, synchronised mechanical, synchronised 

16 Number of gears (forward/reverse) 40/40 40/40 16/16 16/16 24/24 24/24 

17 Speed range (km/h) 0,40-40 0,34-40 2,2-36,3 2,3-37,9 1,5-40 (0,5-40) 1,5-40 (0,5-40) 

18 Rear axle differential lock mechanism 

electro-hydraulic connectiotiotiotiolocking 

electro-hydraulic connec- 



mechanical connection self- 

mechanical connection 

19 Front axle differential lock mechanism hydraulic connection 

electro-hydraulic connection 

self-locking self-locking self-locking self-locking 

20 Clutch multi-disk wet multi-disk wet 

single plate, friction, hydraulically 

controlled draulically controlled draulically controlled draulically 

single plate, friction, hy- 



controlled 

21 POWER TAKE OFF SHAFT (rear PTO) cat. III cat. III 

22 Connection method electro-hydraulic electro-hydraulic electro-hydraulic electro-hydraulic mechanical mechanical 

23 Speed range (min-1) 540/1000 540/750/1000/1400 430/540/750/1000 430/540/750/1000 540/1000 540/1000 

24 POWER TAKEOFF SHAFT (front PTO ) – 

25 Connection method – electro-hydraulic electro-hydraulic electro-hydraulic electro-hydraulic electro-hydraulic 

26 Speed range (min- 1 ) – 1000 1000 1000 1000 1000 

27 DIMENSIONS AND WEIGHTS 

28 Weight with front weights (kg) 9930 7940 5159 5237 4040 4055 

29 Weight distribution on axles – front/rear (kg) 4667/5263 3890/4050 2476/2683 2514/2723 1870/2170 1877/2178 

30 Maximum gross weight (kg) 14000 11000 6500 6500 5100 5100 

31 Maximum front/rear axle load (kg) 6500/1000 550/9000 2800/4500 2800/4500 3600/4000 3600/4000 

32 Axle track (mm) 3010 2704 2396 2369 2222 2222 

33 Axle track - front/rear axle (mm) 1992/1889-1999 1892/1870 1559-1859/15381912 1559-1859/15381912 1570-1730/1500-1800 1570-1730/1500-1800 

34 Maximum turn angle of front wheels 55 o 55 o 55 o 55 o 55 o 55 o 

35 Length/width/height (mm) 5350/2550/3215 5140/2480/3080 4425/2080/2784 4475/2080/2784 4130/1960/2560 4130/1960/2560 

36 HYDRAULIC SYSTEM 

37 Oil tank capacity (dm 3 ) 35 35 40 40 

38 Oil pump delivery (dm 3 /min) 116 106 58 58 58 58 

39 Pressure (bar) 200 200 175 175 175 175 

40 Rear three-point linkage system EHR BOSCH (electr.) EHR BOSCH (electr.) EHR BOSCH (electr.) EHR BOSCH (electr.) mechanical mechanical 

41 Number of hydraulic distribution sections 4 4 3 [4-option] 3 [4-option] 2 [3-option] 2 [3-opcja] 

42 Rear three-point linkage system (kg) 10500 9200 4200 4200 4200 4200 

43 Front three-point linkage system (kg) 5000 5000 2100 2100 2000 2000 

44 BRAKE SYSTEM 

45 Working brakes wet, hydraulically operated wet, hydraulically operated wet, hydraulically operated wet, hydraulically operated wet, hydraulically operated wet, hydraulically operated 

46 Trailer brake system single and double line single and double line 

14 


35-265 hp tractors 

pneumatic, double line 

or double line + single 

line 

pneumatic, double line 

or double line + single 

line 

pneumatic 2+1 pneumatic 2+1

ZEFIR PRONAR KIOTI 1 

ZEFIR 85 ZEFIR 40 320 AMK DK 751C DK 901C DK 551C DK 451C 2 

RICARDO technology RICARDO technology MITSUBISHI PERKINS turbocharged PERKINS turbocharged 3 

97/68EC Stage IIA stage IIIA stage IIIA stage IIIA stage IIIA stage IIIA stage IIIA 4 

85 [62,5] 40,0 [29,4] 36 [26,5] 92,5[68] 55[40,4} 46,2[34] 5 

2400 2400 2200 2200 2200 2200 6 

4 4 4 4 4 4 4 7 

4750 2670 1758 4400 4400 2197 2197 8 

— — — — X X — 9 

— — — — — — — 10 

228 258.4 267 11 

287/1400 142/1680 2000 294/1400 384/1400 177/1600 142,3/1700 12 

155 38 32 100 100 68 58 13 

FIAT 14 

mechanical, synwchronised mechanical mechanical, synchronised 

mechanical, synchronised mechanical, synchronised mechanical, synchronised mechanical, synchronised with 

with reverse 

with reverse 

with reverse 

reverse 

15 

12/4 8/4 16/8 12/12 12/12 12/12 12/12 16 

1,7-28,4 2,28-29,87 0,43-28,93 0,45-30,68 17 

mechanical connection mechanical connection mechanical connection mechanical connection mechanical connection mechanical connection mechanical connection 18 

self-locking 19 

single step, dry, friction friction , dry, two step single plate, friction, dry 

single plate, dry, mechanical 



single plate, dry, mechanical 20 

type 1 type 1 21 

mechanical mechanical mechanical electro-hydraulic electro-hydraulic electro-hydraulic electro-hydraulic 22 

540/1000 540/1000 540/1000 540/1000 540/1000 540/750/100 540/750/100 23 

cat. II 24 

electro-hydraulic electro-hydraulic electro-hydraulic electro-hydraulic 25 

1000 1000 1000 1000 1000 1000 26 

27 

4750 

2582 (weight with front 

three point linkage) 

1820 3520 3528 2359 2011 28 

2390/2360 1077/1505 937/847 1371/2149 1377/2151 964/1395 884/1193 29 

6000 3070 3000 7490 5670 5670 4610 30 

2610/5410 1200/1800 2470/5020 1940/3730 1940/3730 1450/3160 31 

2314 1900 32 

1650-2000/1500-2100 1250/1300-1600 1250-1350/1250-1350 33 

55 o 45 o 55 o 55 o 55 o 55 o 55 o 34 

4255/2010/2905 3870/1545/2390 3582/1565/2360 4205/2142/2735 4330/2142/2735 3663/1735/2480 3630/1540/2333 35 

36 

49,4 24 19 60 60 60 60 37 

46 33 26 46 46 31,7 31,7 38 

16 MPa 16 MPa 16 MPa 39 

mechanical mechanical mechanical mechanical mechanical mechanical mechanical 40 

3 3 3 41 

3000 760 in distance 610 mm 750 2400 2400 1204 1204 42 

2000 350 in distance 610 mm 350 1600 or 50 800 or 750 43 

44 

wet, hydraulically operated wet, mechanically operated wet, disk, independent wet, hydraulically operated 

wet, disk, hydraulically operated 

wet, hydraulically operated wet, hydraulically operated 45 

pneumatic, 2+1 pneumatic, 2+1 pneumatic 2+1 pneumatic, 2+1 pneumatic, 2+1 pneumatic, 2+1 pneumatic 2+1 46 



EN 

This catalogue presents technical specifications of various 

equipment sets occurring equally in standard as in non-standard 

product versions. We are committed to continuously 

improving our products to ensure the highest quality and reliability 

standards, and to meet local regulations and market 

requirements, thus all features and specifications are subject to 

change without prior notice. This publication does not constitute 

a commercial offer. 

PRONAR Sp. z o.o. 17-210 Narew, ul. Mickiewicza 101Atel./fax: +48 85/681 63 29, 681 64 29 fax: +48 85/ 681 63 83 

16 

www.pronar.pl

PRODUCT CATALOGUE 35-265 HP tractors - Pronar

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?